Clicker Dies

[Dink]

I have recently been working with a new die maker that has been making me a few clicker dies. He has done a very good job on the ones I had made. If you need any dies give him a try, he has been offering a satisfaction gurantee / if you do not like it you are not obligated and may return it.

PRO Die is the company and he may be reached at 720-341-3259. Or you can contact me and I will get message to him

prorodeooutfit@aol.com

[JET4]

I know it's a loaded question,but what do they charge (ballpark wise). Having dies would make my life A LOT easier when big orders roll in.

JET

[Luke Hatley]

AT ONE TIME I WAS TOLD A $1.00 AN INCH.... MORE IF YOU NEED PUNCH TUBES IN THEM

[Dink]

Jet4

Dies now run about $1.80 per inch, and the minimum charge is $30. The clicking service is also available here if you were to get your die made and then you have them clicked also if you do not have a clicker or other means to punch them.

If you are interested it cost nothing to send a copy of the pattern and get firm pricing. it can be faxed or emailed. Fax 303-660-0905 or e-mail to prorodeooutfit@aol.com. If you choose to do this include the measurements, because fax and email tends to vary the size on some things. A pattern can also be mailed if that is easier for you. just give Chris a call he is very easy to work with

Thanks

Dink