jbird Report post Posted February 4, 2010 (edited) Howdy Gang I need some input what is the best way and were can I get a dummy or blue gun for a 45LC Ruger or something close to it. I don't want to buy this gun and I need it for a order so what do I do. Thanks Josh Edited February 4, 2010 by jbird Quote Share this post Link to post Share on other sites
DCKNIVES Report post Posted February 4, 2010 Josh, without the gun or replica, I would look at Will Ghormly's "Old West" patterns.I have used these before and they fit very well.Fortunately, old style holsters are not heavily molded like thier new counterparts.I was lucky not long ago to pickup a Great Western 44 Special with a 5 1/2" barrel in a trade for a knife.This has allowed my to do most Old West styles.Good luck.Dave Quote Share this post Link to post Share on other sites
Treed Report post Posted February 4, 2010 (edited) Howdy Gang I need some input what is the best way and were can I get a dummy or blue gun for a 45LC Ruger or something close to it. I don't want to buy this gun and I need it for a order so what do I do. Thanks Josh Is the gun a new model Ruger vaquero or an old one. The new model Vaquero is basically the same size as the Colt single action western, where the older version is slightly larger. For dummy guns you can buy the colt replicas which are more expensive than the blue guns. I have picked up a couple dummy guns in revolvers from Western Stage Props in the past for guns that they don't make blue guns for any more ( Western Stage Props ). The only other place that might have the exact copy of the Ruger Old Vaquero is Duncan's (Duncan's). Will Ghormly's "Old West" patterns are dead on with a nice tight fit ( I use a welt in all my western holsters). I have used his patterns and made the holster, then had the customer bring his gun when he picks up the holster. I show him how to wet form the holster and he takes it with him to dry. Bobby Rose Edited February 4, 2010 by Treed Quote Share this post Link to post Share on other sites
tennoutrider Report post Posted February 4, 2010 Josh, without the gun or replica, I would look at Will Ghormly's "Old West" patterns.I have used these before and they fit very well.Fortunately, old style holsters are not heavily molded like thier new counterparts.I was lucky not long ago to pickup a Great Western 44 Special with a 5 1/2" barrel in a trade for a knife.This has allowed my to do most Old West styles.Good luck.Dave If this is a "New Model Vaquero" it has the same basic dimensions as the Colt SAA. you can get a plastic blue gun of the Colt 5 1/2" from Ring's in Florida. Blue Guns.com...call and ask for a hard copy catalog as the Colt is not shown on their website. it molds up great and costs about $45.00 Quote Share this post Link to post Share on other sites
jbird Report post Posted February 7, 2010 Thanks for the input guys. Josh Quote Share this post Link to post Share on other sites