niftytack Report post Posted February 15, 2010 I'm looking for a few pieces that Weaver does not carry in the stainless steel and solid brass. They are buckles for horse halters or bridles and I could use them for dog collars as well and I would also need d rings for dog collars that are not to thick. Any know know of a good supplier that has a large selection of this stuff? Quote Share this post Link to post Share on other sites
broncobuster Report post Posted February 15, 2010 are you looking for different sizes? cause weaver has those in brass or stainless. I know the sizes are limited. here is a place that caters to the dog collar industry they have probly what your looking for. hope it helps. http://www.cdwplus.com/singleDBB.html Bronc/Bonnie Quote Share this post Link to post Share on other sites
rdb Report post Posted February 15, 2010 Zack White's has these, I think. If you don't see it in their online catalog, just call them and ask. Quote Share this post Link to post Share on other sites
RCZWL Report post Posted February 15, 2010 I'm looking for a few pieces that Weaver does not carry in the stainless steel and solid brass. They are buckles for horse halters or bridles and I could use them for dog collars as well and I would also need d rings for dog collars that are not to thick. Any know know of a good supplier that has a large selection of this stuff? Zack White Leather carries these in 1/2" - 1" in Bronze but not Stainless Steel. Quote Share this post Link to post Share on other sites
rdb Report post Posted February 15, 2010 Then I got mine at Ohio Travel bag. Quote Share this post Link to post Share on other sites
tonyc1 Report post Posted February 15, 2010 I'm looking for a few pieces that Weaver does not carry in the stainless steel and solid brass. They are buckles for horse halters or bridles and I could use them for dog collars as well and I would also need d rings for dog collars that are not to thick. Any know know of a good supplier that has a large selection of this stuff? Are these SS or solid brass? I have replaced 100's of these type of buckles that are die cast, the bar usually breaks. SS or solid brass should be ok if you can get them. Tony. Quote Share this post Link to post Share on other sites
niftytack Report post Posted February 16, 2010 Are these SS or solid brass? I have replaced 100's of these type of buckles that are die cast, the bar usually breaks. SS or solid brass should be ok if you can get them. Tony. I would like to find each of them in 1' and 3/4" in stainless steel and solid brass. I hate to order just a few things from one co. here and another one there, if you know what I mean. The rounded buckle the #162 in the Weaver catalog comes in ss & sb but only in 1" they do have it in sb 3/4 but not the ss go figure. The smaller sizes are always NP or BP I don't like useing that due to it rusting or corrosion. The more square buckle #147 in Weaver catalog they have them in ss & sb for the 1" they have it in 3/4 for the sb but not in the ss for that size. I hope I didn't loose anyone here on this. Thanks for all the replies it did open the door to new suppliers for other things. Quote Share this post Link to post Share on other sites
esantoro Report post Posted February 16, 2010 Beiler's Manufacturing and Supply in Pennsylvania should have those buckles or something similar in either SS or SB. Ed Quote Share this post Link to post Share on other sites
