two crows Report post Posted March 31, 2010 Hi . im a newby to this site and I need some help please. I have a Landis 1 that im trying to get up and running. I finally got some needles for the machine but I havent got a clue how to string it up. Does anyone have a diagram or some info that will help with this? Thanks Mike Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 31, 2010 Hope this helps you. Bob Quote Share this post Link to post Share on other sites
two crows Report post Posted April 1, 2010 Hope this helps you. Bob Hey Bob this was great,got any pics for the bobbin? Thanks Mike Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted April 2, 2010 Mike, Hope this helps. Bob Kovar Quote Share this post Link to post Share on other sites
two crows Report post Posted April 2, 2010 Mike, Hope this helps. Bob Kovar Hey Bob... I noticed from you drawing that I am missing a part or so. Do you have any access for parts for this thing? It was number 10 looks like a needle guide or something. Thanks Mike Quote Share this post Link to post Share on other sites
cowcamp Report post Posted October 28, 2011 Hey bud I found a landis one under a barn post bout a year ago and tore it down and got it running if you like gimme a call and I can help ya out The part your prolly missing sounds like the needle guide bushing and unless you feeling lucky enough to bet on double six with your life savings At the craps tableyou not lukley to to.d any. get some rivets take your needle and make sure it fits inside the hole in the back part then drill it out or make a hole and Insert it in the needle guide the spread it out on bottom side of guide bar. Trust me it works been sewing on mine for a while and It works great. Do not try to sew without the fire bushings my needles cost bout 7 by is a pop and you will break them with out the guide bushings. 210 818 3490 is number names Wil Have fun great machine Quote Share this post Link to post Share on other sites
