Members Aggiebraider Posted May 19, 2010 Members Report Posted May 19, 2010 Howdy Everyone, I am having some trouble finding somewhere that I can buy the Injector Razor Blades for my lace cutter. I know that I can get them off the internet at places like Amazon and eBay, but I was really hoping to find them in town so I didnt have to pay shipping on something so small and cheap (also I dont want to wait for them to get here). I asked at Harbor Freight, Lowes, Hobby Lobby, JoAnn Fabrics, just about everywhere that I could think and no one even knew what I was talking about. Have a good one, CW Quote
Members KnotHead Posted May 19, 2010 Members Report Posted May 19, 2010 I get all mine from Tandy Leather. You can buy them in 10 packs and by the 100 count box. Brian... Quote
Members ahlamarana Posted May 19, 2010 Members Report Posted May 19, 2010 I get mine at the local drugstore, they are with the shaving equipment. I looked at all the hardware and craft stores too before I figured that one out. Quote
Ambassador Luke Hatley Posted May 19, 2010 Ambassador Report Posted May 19, 2010 Howdy Everyone, I am having some trouble finding somewhere that I can buy the Injector Razor Blades for my lace cutter. I know that I can get them off the internet at places like Amazon and eBay, but I was really hoping to find them in town so I didnt have to pay shipping on something so small and cheap (also I dont want to wait for them to get here). I asked at Harbor Freight, Lowes, Hobby Lobby, JoAnn Fabrics, just about everywhere that I could think and no one even knew what I was talking about. Have a good one, CW Thoes are almost a thing of the past, the larger stores in Memphis dont sell them, the only places i have found them are in the older smaller Drug Stores and there is alwaws Tandy............ PS, i grew up in Bryan......sure do miss that area of the Country. Quote
Members Stan Posted May 2, 2012 Members Report Posted May 2, 2012 Howdy Everyone, I am having some trouble finding somewhere that I can buy the Injector Razor Blades for my lace cutter. I know that I can get them off the internet at places like Amazon and eBay, but I was really hoping to find them in town so I didnt have to pay shipping on something so small and cheap (also I dont want to wait for them to get here). I asked at Harbor Freight, Lowes, Hobby Lobby, JoAnn Fabrics, just about everywhere that I could think and no one even knew what I was talking about. Have a good one, CW Quote
Members Stan Posted May 2, 2012 Members Report Posted May 2, 2012 RE: Injector Blades. Call Steve @ Lace Master Tel # 208-884-3766 (a good number the last time I used it). He sells the Lacemaster. It's the one that cuts from the center of a disk of leather. He sells very good blades in boxes of 100. Or try lacemaster.com. No, I don't work for him. I do use his stuff, however. Stan Quote
Members Leatherpownder Posted May 2, 2012 Members Report Posted May 2, 2012 Steve is here in Salmon with us so I can tell him to call ya if you send me the info. Bret. Quote
gringobill Posted May 2, 2012 Report Posted May 2, 2012 Those good injector blades seem to be close to becoming extinct. Like you said, you can order the Shick brand from Amazon which is what I have been doing. Gene Flaten says he buys them in Minot, ND at CVS, but they don't carry them here. I saw somewhere recently that Target had them but I haven't checked here yet. I don't think the Tandy version is near as good as the Shick, it seems like the steel in the Tandy blades is inferior to the Shick. I've seen another brand of injector blade on Amazon, I expect they are high quality as well. Quote
Members Sovran81 Posted September 22, 2013 Members Report Posted September 22, 2013 I posted this a little while ago in supplies. This thread popped up at the bottom of todays page. I hope this link help some of you. These blades have worked great for all my injector blade needs. http://www.razorbladeco.com/products/24-89-0043-coated-injector-blade-in-dispensers.aspx Unfortunately you need to order 2 boxes to meet the minimum. Quote
Members tnawrot2 Posted September 22, 2013 Members Report Posted September 22, 2013 I bought injector blades and scalpel blades from this supplier. http://www.tedpella.com/dissect_html/dissect.htm#_121_4 Quote
Members bucksnort Posted September 22, 2013 Members Report Posted September 22, 2013 You can usually find them in the paint section of hardware stores. Used in paint scrapers. Buck Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.