Members FlatWaterCowboy Posted May 20, 2010 Members Report Posted May 20, 2010 I'm looking for a draw down stand, or some help making a simple one. Thanks for any help, Quote
Members Ken Nelson Posted May 21, 2010 Members Report Posted May 21, 2010 I'm looking for a draw down stand, or some help making a simple one. Thanks for any help, If you check out some past posts, you can get the number for Ken Allen in New Mexico> He builds a super good one. Hope this helps. Ken Quote
Members THein Posted July 26, 2010 Members Report Posted July 26, 2010 I'm looking for a draw down stand, or some help making a simple one. Thanks for any help, I printed off a picture of a draw down stand from the internet and showed it to an old timer around here that does good woodworking. He built it just looking at the picture and what a nice job he did. I didn't have to pay any freight and I offered him the going rate to buy one ready made. He gave me back half the money! I feel sort of like I cheated him but we had a pretty good cuss fight before I gave up. You might look around for somebody close that does woodworking. Keep the money local. Terry www.singletreeleather.com Quote
Members Ken Nelson Posted July 27, 2010 Members Report Posted July 27, 2010 I printed off a picture of a draw down stand from the internet and showed it to an old timer around here that does good woodworking. He built it just looking at the picture and what a nice job he did. I didn't have to pay any freight and I offered him the going rate to buy one ready made. He gave me back half the money! I feel sort of like I cheated him but we had a pretty good cuss fight before I gave up. You might look around for somebody close that does woodworking. Keep the money local. Terry www.singletreeleather.com Eliot Kammerer at Rapid City, SD built the best one I have heard of a while back if you are interested send me an email and I will give you his phone #. Ken Quote
Members jeffroberts Posted August 5, 2010 Members Report Posted August 5, 2010 I'm looking for a draw down stand, or some help making a simple one. Thanks for any help, I just put the finishing touches on a stand, out of the Stohlman saddle making series books, solid as a rock (2x6 base) and pretty easy to construct as well! Jeff Quote
gtwister09 Posted August 5, 2010 Report Posted August 5, 2010 Jeff, Stohlman's design is good but has a flaw. The front end is too high. Unfortunately this allows the tree to sit higher in the front on the stand than with a horse. This will foul up your design for saddle. Troy West had an post on this as well. Stohlman Drawdown Review Regards, Ben Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.