Members suem Posted May 24, 2010 Members Report Posted May 24, 2010 I am looking for a used leather patching machine, i.e shoe patching machine, 18" narrow arm preferred. Highest footlift available. I'm in the south florida area but I'm willing to drive a few states to get it. I would prefer one in good shape that works or at least one that mostly works and parts are easily obtainable for. I don't care if it's just the head or a head with a power stand. I prefer one that has the option of mounting the hand wheel in the front or at the end. Thanks for looking!
Moderator Wizcrafts Posted May 24, 2010 Moderator Report Posted May 24, 2010 I am looking for a used leather patching machine, i.e shoe patching machine, 18" narrow arm preferred. Highest footlift available. I'm in the south florida area but I'm willing to drive a few states to get it. I would prefer one in good shape that works or at least one that mostly works and parts are easily obtainable for. I don't care if it's just the head or a head with a power stand. I prefer one that has the option of mounting the hand wheel in the front or at the end. Thanks for looking! Suem; I happen to have the patcher you are looking for and I am willing to sell it. It is a Singer 29k172, big bobbin, 18" arm patcher, on a treadle base, in perfect working order. It sews a bit over 1/4" of leather and the foot lifts about 5/16". This is the darning model, which has a turnable T-bar by the needlebar and a darning tension disk set. When the T-bar is turned inline with the needlebar, the foot is lifted off the material, allowing you to sew any stitch length, by hand pull. I am located in Flint, Michigan. If you are interested in driving that far contact me via the forum PM. Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members cobbler1 Posted May 25, 2010 Members Report Posted May 25, 2010 (edited) I am looking for a used leather patching machine, i.e shoe patching machine, 18" narrow arm preferred. Highest footlift available. I'm in the south florida area but I'm willing to drive a few states to get it. I would prefer one in good shape that works or at least one that mostly works and parts are easily obtainable for. I don't care if it's just the head or a head with a power stand. I prefer one that has the option of mounting the hand wheel in the front or at the end. Thanks for looking! Hi Suem, I am new to this forum and all of this stuff period. I recently posted about some tools and machinery left by my grandfather and one I've come to figure out is an Adler 30-1 boot patcher. I'm not sure about measurements and all that kind of thing but I do know it works by pressing the treadle and it has a wheel mounted on front. I'm in North Carolina and just email me if you have any questions and I'll try to answer them. stilljerry1@yahoo.com Edited May 25, 2010 by cobbler1
Recommended Posts