Cyborg13454 Report post Posted June 25, 2010 I'm pretty new to leather work and have been using the plastic edge burnisher from tandy up to now but I'm looking to upgrade to something better. I'd like to be able to burnish single peices of leather and sheaths/holsters that are at least 2-3 peices thick so something with a groove and also a flat spot with one rounded side would be nice. Also I'd prefer something that could be put in a drill press over something I'd need to have a separate motor for. I've seen several things similar to this but it seems they were all custom made and the ones I found don't look to be available anymore. So, does anyone here know of somewhere to get something like I'm looking for? Quote Share this post Link to post Share on other sites
King's X Report post Posted June 25, 2010 Check out the leatherman on here..I have one of his burnishers...works very well....workmanship is top notch! Quote Share this post Link to post Share on other sites
Cobra Steve Report post Posted June 26, 2010 We sell the Fantastic Burnisher and have had no problems. After checking out the leatherman's burnisher (if King's X says it is good, then it must be), check out ours. Thanks, Steve Quote Share this post Link to post Share on other sites
Denise Report post Posted June 26, 2010 Elton Joorisity and Deuce on here also both make and sell burnishers. Check out their topics to see what they make and their customers responses to them. Quote Share this post Link to post Share on other sites
electrathon Report post Posted June 27, 2010 I have to recomend the fantastic edge burnisher too. I have one and it is great. Aaron Quote Share this post Link to post Share on other sites
Ferg Report post Posted July 23, 2010 For a cheapy. Check this out: http://www.namepuzzles4kids.com/burnishing.html ferg Quote Share this post Link to post Share on other sites
