Members Deanimator Posted June 28, 2010 Author Members Report Posted June 28, 2010 Learn something new every day because i never knew they medium and heavy blades. Around they only sell one kind and i guess it's the heavy blade. Either way could get both sense they don't cost alot and see which one you like best. If I had to bet money, I'd say that I got the "medium" blades in that package deal, since I'd bet their cheaper. I'll probably see if Home Depot or Lowes has the medium blades. Quote "When I was young, I looked like Al Capone but I lacked his compassion." - Oscar Levant.
Members KB8UVM Posted June 28, 2010 Members Report Posted June 28, 2010 I got this knife a while back http://www.tandyleatherfactory.com/home/department/Tools/Knives-Cutters-Splitters/3595-00.aspx?feature=Product_14 and I love it. I use the curved blade 95% of the time. I strop it every time I pick it up and it will cut through 8-9 oz leather with a single pass. If you search for wood carving knives you'll find this style of knife and several different shaped blades that you can order. That's my 2 cents. Quote
Members Deanimator Posted June 28, 2010 Author Members Report Posted June 28, 2010 I got this knife a while back http://www.tandyleat...ture=Product_14 Thanks for the recommendation. Quote "When I was young, I looked like Al Capone but I lacked his compassion." - Oscar Levant.
BearMan Posted June 29, 2010 Report Posted June 29, 2010 Hi Everybody, It seems that most everybody has a knife they reach for most of the time. Here is what I use for about 75% of trimming type of work. I only use it second to my old "Head Knife". This is actually one that I've made. It's a replica of an old , I believe, english design called a "Half Head Knife". The rounded back of the blade is sharp, just like a round / head knife, but also the inside edge is sharpened about half way down. It can be used just like a head knife, & then flipped over, to use like a utility knife. It's quite handy! I know a lot of us "old Timers" have seen knives like this before. It's about 5" long. Please let me know what You think. Thanks for looking. Ed the"BearMan" Quote Ed the"BearMan" polarb1717@aol.com Beary: BearMauls@yahoo.com http://tinyurl.com/BearMauls "The Best tooling mauls available today!"
Members katsass Posted June 29, 2010 Members Report Posted June 29, 2010 Hi Everybody, It seems that most everybody has a knife they reach for most of the time. Here is what I use for about 75% of trimming type of work. I only use it second to my old "Head Knife". This is actually one that I've made. It's a replica of an old , I believe, english design called a "Half Head Knife". The rounded back of the blade is sharp, just like a round / head knife, but also the inside edge is sharpened about half way down. It can be used just like a head knife, & then flipped over, to use like a utility knife. It's quite handy! I know a lot of us "old Timers" have seen knives like this before. It's about 5" long. Please let me know what You think. Thanks for looking. Ed the"BearMan" BearMan: I like it........a beautiful knife. The knife I consider my 'dedicated' leather knife is this old 'Murphy' Knife. By old I mean that I know it's at least 70 years old, as it's been around since I first saw it at about 4-5 yrs of age. I remember reaching out to pick it up once, then, my grandfather's very firm grip on my wrist before I got hold of it. He told me that it cut three ways.....long, deep, and continuous. It ain't pretty, but it holds a great edge. I've used it for over 30 years just for leather holster work now. Mike ' Quote NOTE TO SELF: Never try to hold a cat and an operating Dust buster at the same time!! At my age I find that I can live without sex..........but not without my glasses. Being old has an advantage.......nobody expects me to do anything in a hurry.
Members LeatherCaptain Posted June 29, 2010 Members Report Posted June 29, 2010 I started with Exacto knives but found I kept breaking the tips and needed to constantly replace them. It's a good choice if your only cutting out a pattern or two at a time. But, if you're chopping up an entire side, constantly changing blades gets annoying. So, I purchased a head knife based on recommendations here and from the local Tandy shop manager. It works. It works great for long straight runs or minor curves. I know I could use it for a tight radius if I HAD to but it's kind of a slow process. Ultimately I've taken to the Al Stohlman Trim knife at Tandy's. They're relatively cheap and I can keep stropping it or put it to the grinding stone when I need to. I like the claw like blade that allows me to cut a nice tight radius without grinding the edges. Right after stropping or grinding on the stone, I can get through 7/8 in one pass. But, my hand strength generally weakens over time and it'll take a couple of passes. http://www.tandyleatherfactory.com/home/department/Tools/Knives-Cutters-Splitters/35015-00.aspx You might even check out some wood workers knives. There are a few makers out there that have similar blade geometry to the Stohlman knife above and a fairly affordable. Quote
Members Deanimator Posted June 30, 2010 Author Members Report Posted June 30, 2010 I just picked up a pack of the Stanley "Fat Max" blades for my razor knife. I'm almost ready to start cutting on my tuckable IWB design. We'll see how much better (if any) these do than the blades which came with the knives. Quote "When I was young, I looked like Al Capone but I lacked his compassion." - Oscar Levant.
Members yepod Posted July 1, 2010 Members Report Posted July 1, 2010 I have used several knives over the years, started with the "Stanley" utility knife like first discussed. Tried 'Murphy style' for a while, then switched to a clicker knife w/ curved blade (similiar to Tandy blade like KB8UVM posted but longer and fixed in a wood handle Used by shoemakers I think. I still use this a lot and it keeps a wicked edge quite easily. I have that Tandy knife but instead use a plastic handled Warren Cutlery (for wood carving) with that same replaceable curved blade. It's a bit shorter and fits my hand well. Got a set of three with a few blades on ebay a few years ago. It looks similar to this one. http://www.thewoodcr...S-ONLY-JW2.html I don't know this source but the handles are quite reasonably priced (even in rosewood) and the blades are cheaper than Tandys too (less than $1.60 each). http://www.thewoodcr...-3-PKG-10B.html Now I'm learning how to put a good edge on a head knife and finally going traditional! Quote
Members Lippy Posted July 1, 2010 Members Report Posted July 1, 2010 Warren Cutlery makes the knives for Tandy and they are cheaper if your buy direct from them. http://www.warrencutlery.com/ Very nice folks. Someone earlier mentioned the Murphy knives. Check 'em out here. http://www.rmurphyknives.com/store/blades.html Also very nice people and they have a whole selection of leather knives. 'Been making them for a long time. I like the head knife because you push it away from your body and it's easy to cut a straight line without using a ruler thanks to the blade design. Why fight tradition. The head knife works well for me. Working with leather demands that you learn how to sharpen a knife. Cheers. Quote
Members albane Posted July 1, 2010 Members Report Posted July 1, 2010 (edited) BearMan: I like it........a beautiful knife. The knife I consider my 'dedicated' leather knife is this old 'Murphy' Knife. By old I mean that I know it's at least 70 years old, as it's been around since I first saw it at about 4-5 yrs of age. I remember reaching out to pick it up once, then, my grandfather's very firm grip on my wrist before I got hold of it. He told me that it cut three ways.....long, deep, and continuous. It ain't pretty, but it holds a great edge. I've used it for over 30 years just for leather holster work now. Mike ' "He told me that it cut three ways.....long, deep, and continuous." I have to remeber that one. I have a couple go to knifes. The tool I find most useful is an Olfa cutter and a good mat. I have a Knife that looks just like the one pictuered above. I bought it when I was working in a boot factory. this type of knife is called a skiving knife. Mine is plain without the handle. machine shop here I come... that handle is just the solution for the sore fingers that bare blade produces. Like any tool It's the craftsman that makes the tool work. It sure is nice working with good tools. from top to bottom: 4) assorted exacto handles (funny the one I like best is missing 1/2" dia alum. handle) 1) skiving knife (from the boot factory) note the bare blade.... the pro guys....low wage hard working extremely talented immigrant guys had there own way of protecting there fingers by wrapping the handle with leather tape etc. They can make anything using only that tool. I lost a few bets saying I can do that with this. Humbling to say the least 1)Osborne trim knife 1) head knife 1) med olfa 1) small olfa I find the med. and small olfa serve me best the large tend to break to often. the med is great for straight lines with the help of a good straight edge. med is limited to about a 6"dia curve. the small olfa is nice for about 1 1/2" dia. depending on what your cutting. the draw back with the olfa system is joining 2 cuts at an angle like a 90 or 45 if one is not careful you can tend to over cut and make an X in the corner. Edited July 1, 2010 by albane Quote Al Bane<br />Al Bane For Leather<br />818 209 7945 <br />www.myspace.com/albaneforleather<br />www.facebook.com/albaneforleather<br />www.albaneforleather.etsy.com
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.