Jump to content

Recommended Posts

I made a few bits and pieces for friends in Knutsford recently and was planning on having a little break from leatherwork for a week or two but a new air rifle inspired me to make a simple bag for pellets. For a change I used an oil finish on this to make it softer. This worked out well and made me think of a couple of projects I could do using thin leather and an oiled finish.

So first off I had been planning on making a belt pouch for all the stuff I carry in my pockets. This is the stuff it is always handy to have about, leatherman juice, small torch, lighter, piece of string, secure flash drive, tweezers and diamond sharpening card. Much as all this fitted in my pockets it made them look like a gerbil's cheeks. I had planned a wet formed pouch for this but as it turned out a soft leather one worked better.

It is just a simple pancake style with a clip attached to the back and closed with a couple of press studs.

softbags5.JPG

softbags6.JPG

softbags7.JPG

As usual one things leads to another. I had already made a canvas messenger style bag for my Ipad but was not entirely happy with it. So I remade it in leather but with buckle closures and a better attachment of the "D" rings on the back.

I am very pleased with this but forgot that I should have made it just a little bigger. It fits the Ipad in its cover perfectly well but if it had just been a centimetre or so wider it would also have taken an A4 pad when required. Still as I am as pleased with the result chances are I will make a few more like this.

As usual it is all hand stitched in artificial sinew with all brass fittings.

softbags1.JPG

softbags2.JPG

softbags3.JPG

softbags4.JPG

Share this post


Link to post
Share on other sites

Very nice! I really like those.

Chris

www.builderofstuff.com

Share this post


Link to post
Share on other sites

nice like the desgin and color

Share this post


Link to post
Share on other sites

I made a few bits and pieces for friends in Knutsford recently and was planning on having a little break from leatherwork for a week or two but a new air rifle inspired me to make a simple bag for pellets. For a change I used an oil finish on this to make it softer. This worked out well and made me think of a couple of projects I could do using thin leather and an oiled finish.

So first off I had been planning on making a belt pouch for all the stuff I carry in my pockets. This is the stuff it is always handy to have about, leatherman juice, small torch, lighter, piece of string, secure flash drive, tweezers and diamond sharpening card. Much as all this fitted in my pockets it made them look like a gerbil's cheeks. I had planned a wet formed pouch for this but as it turned out a soft leather one worked better.

It is just a simple pancake style with a clip attached to the back and closed with a couple of press studs.

As usual one things leads to another. I had already made a canvas messenger style bag for my Ipad but was not entirely happy with it. So I remade it in leather but with buckle closures and a better attachment of the "D" rings on the back.

I am very pleased with this but forgot that I should have made it just a little bigger. It fits the Ipad in its cover perfectly well but if it had just been a centimetre or so wider it would also have taken an A4 pad when required. Still as I am as pleased with the result chances are I will make a few more like this.

As usual it is all hand stitched in artificial sinew with all brass fittings.

That's just beautiful! What kind of leather did you use for the bag? I'm just starting out, and I'm still trying to get a handle on what weights and types should be used for what, project-wise.

Share this post


Link to post
Share on other sites

That's just beautiful! What kind of leather did you use for the bag? I'm just starting out, and I'm still trying to get a handle on what weights and types should be used for what, project-wise.

The leather is veg tanned and about 1.5 to 2mm thick. A friend got it for me from a re-enactors market so I can't be more specific.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...