Thistledown Report post Posted August 29, 2010 (edited) Here's a pic of a medieval-style "Leather Bottell" I made a few years ago when I was doing medieval re-enactment stuff. Please excuse the marks - I managed to spill some of the molten pitch that coats the interior of the flask while I was pouring it inside. The pitch waterproofs the leather very well, just don't use and spirits or you'll dissolve it - yech This was a first-time project, no decorations, just to see if the project was practical. Edited August 29, 2010 by Thistledown Quote Share this post Link to post Share on other sites
Tina Report post Posted August 29, 2010 The stains just makes it more realistic :-) Whish I could pick your brain about making one of these bottles, and where in the world do I get "molten pitch" and what it it really? Quote Share this post Link to post Share on other sites
druid Report post Posted August 29, 2010 I think it's Pine Pitch and that's a nice bottell! Quote Share this post Link to post Share on other sites
wildland Report post Posted August 30, 2010 The stains just makes it more realistic :-) Whish I could pick your brain about making one of these bottles, and where in the world do I get "molten pitch" and what it it really? Generally I use a mixture on brewers (pine) pitch and bees wax to coat the inside of mugs and bottles. Both are readily available on the internet and are relatively cheap. They are sold by the pound most places. As for molten a double boiler works really well although not necessary, whatever you heat it up in don't expect to use it for anything else ever again. also I would suggest covering anything you don't want ruined. Quote Share this post Link to post Share on other sites