Jump to content

Recommended Posts

I have antiqued a basketweave guitar strap and the antiquing looks light in places. I have gone over it several times.... what can I do?

Share this post


Link to post
Share on other sites

Can you describe a little about the method you used to apply the antique? Also, what kind of antique did you use?

Kate

Share this post


Link to post
Share on other sites

Lindatt.....without a photo, to see what happened,this is how i do it.

tool---- dye--- apply finish---- then apply your favorite antique & wipe it off - then another coat of finish.

for me only the DEPRESSIONS will have the Antique ...

Share this post


Link to post
Share on other sites

thx guys... I just rubbed gold on and buffed it really good... looked nice and my friend liked it... so guess all worked out ok.... but thx for your answers to try to help me.....

Share this post


Link to post
Share on other sites

Lukes method is about same as I do, in general. Test on a scrap piece, apply liberally with the antiquing and allow it to dry completely then wrap your moist cloth around a flatbased sponge and start rubbing of gently. Keep a small tub with water closeby and washout the cloth when it is clogged otherwise you'll just smear it out (wich can create finishes like on that reddish/black rodtube I had up a couple of weeks ago). The flatbase sponge is key here since it wont get down into the depressions.

Also wanna add that I've done this a few times and I'm no expert, stuff like this can feel like first time everytime. I'm always very nervous when I start dyeing/ antiquing a larger piece, big lump in my belly.

Tom

Edit: your last post slipped in while I wrote this one. Can I please see a pic of this golden effect you got. I got a purse in the makings that will have the same reddish/black theme from the rodtube but with golden sparkles for glamour girl.

Edited by TomSwede

Share this post


Link to post
Share on other sites

It also may help to remember to keep your cloth flat while wiping off the excess, so that you don't inadvertently remove antique from the impressions.

Kate

Share this post


Link to post
Share on other sites

It's also possible that your basket weave stamping was a bit lighter and not as deep in all places, thus giving you less antique staying in the less deep areas.

Ken

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...