Stardesigner Report post Posted February 26, 2011 I just bought a juki 562 and I have never used this type of machine. I threaded it by the book and the bobbin is all properly threaded. But it just goes up and down and the material does not move forward. What do I need to do? Help?? Quote Share this post Link to post Share on other sites
Luke Hatley Report post Posted February 26, 2011 #1 thought is there is a stich length lever that adjust the stich length ,forward or reverse, it could be set in the middle , move the lever forward or backwards. and Good Luck. talk to the person you bought the machine from. they might help you out. Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted February 26, 2011 (edited) If you have the book go to the stitch length page #10&11 you need to push on the button on the bed just to the right of the plate over the bobbin Let me know if you need anymore help. I have the manual & can copy off this part. Bob Edited February 26, 2011 by sewmun Quote Share this post Link to post Share on other sites
Stardesigner Report post Posted February 26, 2011 Thank You I tried to call you and I left you my number. I am not sure what to do and I do better if someone tells me who has done it before. Sandy If you have the book go to the stitch length page #10&11 you need to push on the button on the bed just to the right of the plate over the bobbin Let me know if you need anymore help. I have the manual & can copy off this part. Bob Quote Share this post Link to post Share on other sites
