Docado Report post Posted March 1, 2011 Tippmann 1500 Clicker is in like New Condition........For sale. $2400.... St. Louis, Mo. Area. May pick up of arrange shipping at your expense. Questions welcome. Thanks Kirk Share this post Link to post Share on other sites
kgreining Report post Posted March 18, 2011 Hi Kirk, Do you still have the Tippmann Clicker? Can you give me any more information about it please? Thanks, Kara Share this post Link to post Share on other sites
Docado Report post Posted March 18, 2011 Hi Kirk, Do you still have the Tippmann Clicker? Can you give me any more information about it please? Thanks, Kara Hello Kara, Yes I still have it....... It is for sale because I do not need two clickers and I need the space it occupies. 1 1/4 inch dies are recommended, but you may use 3/4 inch if you use 1/2 inch plastic cutting board for a spacer. If you go to Tippmann Web Site and bring up 1500 Clicker it will give all the specs. The address below ought bring it right up. http://tippmannclicker.com/index.php?main_page=product_info&products_id=185 Hope that answers your questions if not just holler........Thanks for your interest.....Kirk Share this post Link to post Share on other sites
kgreining Report post Posted March 19, 2011 Hello Kara, Yes I still have it....... It is for sale because I do not need two clickers and I need the space it occupies. 1 1/4 inch dies are recommended, but you may use 3/4 inch if you use 1/2 inch plastic cutting board for a spacer. If you go to Tippmann Web Site and bring up 1500 Clicker it will give all the specs. The address below ought bring it right up. http://tippmannclicker.com/index.php?main_page=product_info&products_id=185 Hope that answers your questions if not just holler........Thanks for your interest.....Kirk Share this post Link to post Share on other sites
kgreining Report post Posted March 19, 2011 Hi Kirk, Just a few more questions. How old is it? What type of work has it been used for? What, if anything is included with it? Stand? Air accumulator? What is the condition of the cutting bed? I am ready to purchace one and was going to go with a new one. Thanks, Kara kgreining@aol.com Share this post Link to post Share on other sites
Docado Report post Posted March 19, 2011 Hi Kirk, Just a few more questions. How old is it? What type of work has it been used for? What, if anything is included with it? Stand? Air accumulator? What is the condition of the cutting bed? I am ready to purchace one and was going to go with a new one. Thanks, Kara kgreining@aol.com Hello Kara, I have had it about 2 years. I used it to cut leather items,spur straps, bridles, key fobes and such. Nothing is included. Cutting bed is in very good shape. You are more than welcome to come and try it. If I was looking to get one, I would hope that I could find one in as good a shape as this is. My preference is used over new account of the cost savings... Will try to get some pic's if interested. Thanks for your consideration Kirk Share this post Link to post Share on other sites
kgreining Report post Posted March 19, 2011 Hello Kara, I have had it about 2 years. I used it to cut leather items,spur straps, bridles, key fobes and such. Nothing is included. Cutting bed is in very good shape. You are more than welcome to come and try it. If I was looking to get one, I would hope that I could find one in as good a shape as this is. My preference is used over new account of the cost savings... Will try to get some pic's if interested. Thanks for your consideration Kirk Share this post Link to post Share on other sites
kgreining Report post Posted March 19, 2011 Hi KIrk. I am very interested. I am 5 or 6 hours away from STL. Can you contact me by email? kgreining@aol.com Not really sure how to work it out as far as seeing it and if I buy it picking it up. I will be doing the same type of work with it as you. Maybe you can guide me where to get dies made etc. Thanks, Kara Share this post Link to post Share on other sites
BeastMaster Rodeo Report post Posted April 14, 2011 Did you sell your clicker Share this post Link to post Share on other sites
Docado Report post Posted April 19, 2011 Did you sell your clicker I still have it. Let me know if there is something that I can answer for you. Thanks Kirk Share this post Link to post Share on other sites
BeastMaster Rodeo Report post Posted April 21, 2011 Please call me I'm very interested I would need to ship it or drive there.So I would need more info 260-433-2455 Tim Share this post Link to post Share on other sites
Ridgewood Report post Posted May 9, 2011 Do you still have this for sale? Thanks- Share this post Link to post Share on other sites
Ridgewood Report post Posted May 9, 2011 Can you give me your zip code? thanks- Share this post Link to post Share on other sites
Docado Report post Posted May 14, 2011 Can you give me your zip code? thanks- Hello, Sorry that I missed this ! Yes I still have it. 62295. Let me know if I can be of more help. Will keep a closer eye on it. Thanks for inquiry. Kirk Share this post Link to post Share on other sites
heathn66 Report post Posted January 24, 2012 i wanted to get an estimate on shipping to the area code 76244 Share this post Link to post Share on other sites
Docado Report post Posted July 10, 2015 Tippmann 1500 Clicker is in like New Condition........For sale. $2400.... St. Louis, Mo. Area. May pick up of arrange shipping at your expense. Questions welcome. Thanks Kirk I still have clicker for sale. Life sort of put this on back burner. Will take $2100. Kirk Share this post Link to post Share on other sites
Neff Report post Posted October 28, 2016 Do you still have clicker? Share this post Link to post Share on other sites
Jess Jones Report post Posted November 4, 2016 (edited) Hi Docado....still have the tippmann clicker for sale? Edited November 4, 2016 by Jess Jones Share this post Link to post Share on other sites
Docado Report post Posted January 17, 2017 Yes still available. Sorry just say inquiry. Share this post Link to post Share on other sites
CopperCreek Report post Posted January 24, 2017 On 1/17/2017 at 10:47 AM, Docado said: Yes still available. Sorry just say inquiry. PM Sent Share this post Link to post Share on other sites
aquinn1989 Report post Posted May 21, 2017 On 1/17/2017 at 10:47 AM, Docado said: Yes still available. Sorry just say inquiry. Hi do you still have this available? Please contact me at laddercoleather@yahoo.com if you do. I am in the KC area. thanks alex Share this post Link to post Share on other sites
Docado Report post Posted May 25, 2017 Hello Alex Yes I still have clicker and it's available. Still works fine, I just used it a couple of weeks ago. Thanks for your inquiry. Kirk Share this post Link to post Share on other sites
