Members skienite Posted March 11, 2011 Members Report Posted March 11, 2011 Trying to help a friend resurrect an old Consew 225 to sew leather tack and harnasses. Got the machine cleaned up and running by using the manuals I found online, but I'm having incredible trouble with the thread tensions. I've followed all the instructions in the manual about threading and adjusting tension, but I can't seem to get the top tension loose enough or the bobbin tension tight enough to keep the machine from pulling the bobbin thread up through the work. Any help would be greatly appreciated. Quote
Members albane Posted March 11, 2011 Members Report Posted March 11, 2011 Trying to help a friend resurrect an old Consew 225 to sew leather tack and harnasses. Got the machine cleaned up and running by using the manuals I found online, but I'm having incredible trouble with the thread tensions. I've followed all the instructions in the manual about threading and adjusting tension, but I can't seem to get the top tension loose enough or the bobbin tension tight enough to keep the machine from pulling the bobbin thread up through the work. Any help would be greatly appreciated. call me and i'll talk you through it Al 818 209 7945 Quote
Members skienite Posted March 25, 2011 Author Members Report Posted March 25, 2011 call me and i'll talk you through it Al 818 209 7945 I appreciate the response, but the machine is on the back burner until the end of April. Hope you don't mind a phone call in that time frame. =) Quote
Members albane Posted March 25, 2011 Members Report Posted March 25, 2011 I appreciate the response, but the machine is on the back burner until the end of April. Hope you don't mind a phone call in that time frame. =) As you wish. Quote
CowboyBob Posted March 25, 2011 Report Posted March 25, 2011 When you thread the bobbincase are you sure your getting it in the slot & under the spring correctly?It's also possible that you need a new bobbincase spring. Bob Quote
Members skienite Posted June 6, 2011 Author Members Report Posted June 6, 2011 Sorry for the huge gap in response time. Just got back to trying to work on this machine. As for threading the bobbincase, I'm following the only instructions I could find online for a similar machine. The machine I am working has similar internals but looks older, with a solid, cast body. I 'shopped this up from the instructions to try and show what I'm doing: If you still think the spring needs replacing, any information on where to get one would greatly be appreciated. Thanks again! Tim When you thread the bobbincase are you sure your getting it in the slot & under the spring correctly?It's also possible that you need a new bobbincase spring. Bob Quote
CowboyBob Posted June 6, 2011 Report Posted June 6, 2011 By threading it the way ur arrow is pointing is wrong,because as ur sewing it (the thread) can work it's way out from under the spring. Bob Quote
Members skienite Posted June 14, 2011 Author Members Report Posted June 14, 2011 By threading it the way ur arrow is pointing is wrong,because as ur sewing it (the thread) can work it's way out from under the spring. Bob Threading direction was my problem. Machine is running fine now. Thank you for your help! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.