Members hiloboy Posted May 31, 2008 Author Members Report Posted May 31, 2008 (edited) Shorts, thanks for your help.. i'm going to give it a try. the airbrush sounds like the way to go when putting on your finish..thanks again for the info... Edited May 31, 2008 by hiloboy Quote Aloha, Curt http://www.picturetrail.com/linecutter
Members singteck Posted June 22, 2008 Members Report Posted June 22, 2008 I have the same problem trying to source the Professional Oil dye. But I have found a dye powder that I can mix myself. They come in powder form or crystal depending on colour and when added to spirit looks and perform like the oil dye. It can disolve in oil based tinner as well so I would assume it is the same stuff used in the oil dye. singteck Quote
Members hiloboy Posted June 23, 2008 Author Members Report Posted June 23, 2008 singteck, can i get a link to your source for powder dyes. sounds like what i'm looking for mahalos for the help.. Quote Aloha, Curt http://www.picturetrail.com/linecutter
Members singteck Posted June 23, 2008 Members Report Posted June 23, 2008 I get them from the hardware shops around here. They used it for wood dye. singteck Quote
Members Shorts Posted June 23, 2008 Members Report Posted June 23, 2008 Out of curiosity, would pottery powders and pigments work in spirits? Quote
Members singteck Posted June 23, 2008 Members Report Posted June 23, 2008 Pottery powder and pigments are not dye but they can be used as stains. They do not disolve in the solvent but suspended in the matrix. I could be wrong. singteck Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.