KAYAK45 Report post Posted April 27, 2011 I just ran into a used 3-1 Landis, Have not seen. What does it do besides cutting straps. The current owner does not know. Quote Share this post Link to post Share on other sites
LilRay Report post Posted April 27, 2011 The three are Cuts, Skives and Splits. God Bless, Ray Quote Share this post Link to post Share on other sites
Luke Hatley Report post Posted April 27, 2011 Lil Ray....got 2 out of three. cuts...skives.....and it has a welt roller on it, used for pressing the welt to the out sole. Quote Share this post Link to post Share on other sites
LilRay Report post Posted April 27, 2011 Lil Ray....got 2 out of three. cuts...skives.....and it has a welt roller on it, used for pressing the welt to the out sole. Luke, Brother, I've been at this two and a half months. Two out of three ain't bad for a newbie. God Bless, Ray Quote Share this post Link to post Share on other sites
KAYAK45 Report post Posted April 27, 2011 Alright! I got a picture off FEEBAY. Cannot tell how it skives or the width of skive. Any answer close is OK Quote Share this post Link to post Share on other sites
Art Report post Posted April 27, 2011 The ? in ones were made for the shoe trade, primarily repair work. The skiver part will do about a 1/2 to 3/4 inch skive; NOT TO A FEATHER. It is made to do heavy sole leather up to about 12 iron (1/4 inch). The cutter is the round knife type of cutter, again for heavy sole leather to the depth of the ?in1's throat. There is also a welt press as Luke said and it is good for pressing edges down. The welt is a piece of sort of oil tanned leather that holds the insole and uppers to the outsole. Art Alright! I got a picture off FEEBAY. Cannot tell how it skives or the width of skive. Any answer close is OK Quote Share this post Link to post Share on other sites
