mlapaglia Posted January 24, 2012 Report Posted January 24, 2012 I will take 5. PM sent Michael Quote The key to immortality is first living a life worth remembering. Bruce Lee
Members Kcinnick Posted April 5, 2012 Members Report Posted April 5, 2012 Hey Big Poppa Leather, I have 50 Mechanic's Buckles being blanked out as I write this. 300 series stainless steel; 1" wide X 2.5" long. 2 prongs. Estimated cost is about $4.50Ea. Shipping is actual cost, your method as preferred. I'd like a minimum order of 5, if possible. Will have photos (hopefully) by end of this week. Sound OK? Sorry about the delays. Much illness issues. CAMPCHAIR See below - Campchair Do you have any more, I could use a few... Quote
Members Campchair Posted April 21, 2012 Members Report Posted April 21, 2012 OK all, I FINALLY have 50 ready. Just "Private Mail" me your addresses and I'll drop them in the mail. I don't charge "handling fees" as I usually just use the USPS One-Fee gets it all and gets it there" envelopes. I've attached some photos. They are made of .130" 300 series Stainless Steel. They were laser cut so the edges are really good with no appreciable burrs. I'm deburring them anyway with some needle files; just my nature, I suppose. The prongs can be bent a tad more if the leather is a bit thick. The finished measurements are 1" wide X 2" long. The prongs are a hefty .250" wide, so they will accomodate a pretty good-sized "belly". Price is $4.50ea. + postage ($2.00?). Better order several as the postage is $2.00 on one or 20. I have the set-up perfected and can crank them out pretty quickly at 50 per lot with a couple of day's notice. And,..these were made 100% right here in Alabama, USA!! Sincertely, Campchair (And with apologies for being so tardy. Lots of water over the dam since April, 2011, when this first came up. Lots of loss, too) Quote
mlapaglia Posted April 21, 2012 Report Posted April 21, 2012 pm sent Quote The key to immortality is first living a life worth remembering. Bruce Lee
Members Campchair Posted April 23, 2012 Members Report Posted April 23, 2012 Big Poppa,Have just finished up 50 buckles. See my latest post. Campchair Anyone know a source for a double prong mechanic's belt type buckle? Any help appreciated! Allen Quote
Members Goaway Posted September 15, 2017 Members Report Posted September 15, 2017 just curious to whether you have any stainless steel 1 1/2" mechanics belt buckles Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.