Members DonnieBlaze Posted August 16, 2011 Members Report Posted August 16, 2011 Does any one now how or now where i may fin info on making my own manual and electric burnishers? Quote
King's X Posted August 16, 2011 Report Posted August 16, 2011 Dremel tool or drill press. We have a couple of members on here that make the burnisher attachments. Good luck! Quote
Members DonnieBlaze Posted August 16, 2011 Author Members Report Posted August 16, 2011 thanks for the info king's x. i have the dremmal just need the attatchment or info on making them my self Quote
Members Spinner Posted August 16, 2011 Members Report Posted August 16, 2011 thanks for the info king's x. i have the dremmal just need the attatchment or info on making them my self Hey Donnie, I made them for the dremel but if you have access to a lathe and simply need info, drop me a line. my website is also below. Chris Quote
Members Wishful Posted August 16, 2011 Members Report Posted August 16, 2011 What tip number do you use for the dremel? Quote
Members Spinner Posted August 16, 2011 Members Report Posted August 16, 2011 (edited) What tip number do you use for the dremel? I actually use the 1/4" sanding drums. The sandpaper and rubber bushing are recycled leaving the shaft, washer and screw. The shaft where the burnisher wood bit goes is 1/8" dia. x 1/2" long. Edited August 16, 2011 by Spinner Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.