Members sinpac Posted December 1, 2011 Members Report Posted December 1, 2011 (edited) Got my belt and bobbin winder the Saturday after Thanksgiving I had to do a little Mod on the bobbin winder mount. I went to home depot and picked up a #10-32 x 1/2" Stainless Socket Cap screw and a bag of #8 flat washers. All I did was simply applied two washer between the winder and machine and tighten down the screw Thanks Bob for having the parts and the speedy delivery. Chris Edited December 1, 2011 by sinpac Quote
CowboyBob Posted December 2, 2011 Report Posted December 2, 2011 Chris, I'm glad you got the parts,couldn't the handwheel be moved? Bob Quote
Members sinpac Posted December 2, 2011 Author Members Report Posted December 2, 2011 Chris, I'm glad you got the parts,couldn't the handwheel be moved? Bob The hand wheel is as far in as it could go so I needed to bring the winder out to meet it. Quote
CowboyBob Posted December 2, 2011 Report Posted December 2, 2011 I put it on a 29-4 b4 I shipped it & had to move the wheel out on our machine but then Singer has a few different wheels. It's great you got it working,alot easier then winding them by hand. Bob Quote
Members sinpac Posted December 2, 2011 Author Members Report Posted December 2, 2011 Got that right Bob. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.