sinpac Report post Posted December 1, 2011 (edited) Got my belt and bobbin winder the Saturday after Thanksgiving I had to do a little Mod on the bobbin winder mount. I went to home depot and picked up a #10-32 x 1/2" Stainless Socket Cap screw and a bag of #8 flat washers. All I did was simply applied two washer between the winder and machine and tighten down the screw Thanks Bob for having the parts and the speedy delivery. Chris Edited December 1, 2011 by sinpac Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted December 2, 2011 Chris, I'm glad you got the parts,couldn't the handwheel be moved? Bob Quote Share this post Link to post Share on other sites
sinpac Report post Posted December 2, 2011 Chris, I'm glad you got the parts,couldn't the handwheel be moved? Bob The hand wheel is as far in as it could go so I needed to bring the winder out to meet it. Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted December 2, 2011 I put it on a 29-4 b4 I shipped it & had to move the wheel out on our machine but then Singer has a few different wheels. It's great you got it working,alot easier then winding them by hand. Bob Quote Share this post Link to post Share on other sites
sinpac Report post Posted December 2, 2011 Got that right Bob. Quote Share this post Link to post Share on other sites
