Boriqua Posted March 23, 2016 Report Posted March 23, 2016 (edited) Thanks Alex. Online, the only ones close to that small are pronged, not the brad hole. Are these the ones you've used? I use the ones with the prongs but I take an end nip and I cut the prongs by about half but leave them sharp. I have found them in brass but the steel ones are available everywhere. I keep a little bag of 6-32 brass screws in 3/8 and 1/2. If its going on a black item I paint it with nail polish. Here is the set up going through three pieces of 8-9 oz leather. Edited March 23, 2016 by Boriqua Quote
Members BadDaditood Posted March 25, 2016 Members Report Posted March 25, 2016 French beveler is a handy tool to have around... skive/countersink the back side Quote
Boriqua Posted March 25, 2016 Report Posted March 25, 2016 the images disappeared and someone may find them useful so I posted them again Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.