Boothill Bob Report post Posted January 31, 2012 Howdy pards.. Now I´ve made my first IWB holster for a customer... Want to thank all of you that have helped me out with tip and pattern.. //BhB Quote Share this post Link to post Share on other sites
joshk Report post Posted January 31, 2012 nicely done! I like the extra detail in the boning.... Quote Share this post Link to post Share on other sites
Sixer Report post Posted January 31, 2012 Great looking holster! Quote Share this post Link to post Share on other sites
Big O Report post Posted February 1, 2012 Very clean work! Quote Share this post Link to post Share on other sites
NoName Report post Posted February 1, 2012 One of the best designs I have seen. Quote Share this post Link to post Share on other sites
Boothill Bob Report post Posted February 2, 2012 Thanx pards. Its a fun holster to make. To bad I dont have any dummies so I can make it for Outher guns to. Here is the back side. Next time I will put the T-nuts betwin the leather. Quote Share this post Link to post Share on other sites
JoshLSTV Report post Posted February 6, 2012 Awesome detail in the boning! What tool did you use to get such detail? Quote Share this post Link to post Share on other sites
Boothill Bob Report post Posted February 6, 2012 (edited) Awesome detail in the boning! What tool did you use to get such detail? Thanx Josh. I just used a bone and a modeling tool. Edited February 6, 2012 by Boothill Bob Quote Share this post Link to post Share on other sites
malabar Report post Posted February 6, 2012 Thanx Josh. I just used a bone and a modeling tool. Beautiful work!. One thing you might think about for next time is using two tee-nuts t attach the straps. That prevents the straps from twisting and loosening up over time. tk Quote Share this post Link to post Share on other sites
Boothill Bob Report post Posted February 6, 2012 Beautiful work!. One thing you might think about for next time is using two tee-nuts t attach the straps. That prevents the straps from twisting and loosening up over time. tk Will do that, thanx. Quote Share this post Link to post Share on other sites
Matt Alsaker Report post Posted February 7, 2012 Very nice. I just finished my first IWB holster and posted it also. I have problems with the mouth of the holster collapsing when the gun is drawn. I can still get the gun back into the holster, but I'd be curious if you did anything to reinforce the mouth? Howdy pards.. Now I´ve made my first IWB holster for a customer... Want to thank all of you that have helped me out with tip and pattern.. //BhB Quote Share this post Link to post Share on other sites
Big O Report post Posted February 8, 2012 Very nice. I just finished my first IWB holster and posted it also. I have problems with the mouth of the holster collapsing when the gun is drawn. I can still get the gun back into the holster, but I'd be curious if you did anything to reinforce the mouth? The reinforcement piece that wraps nearly ALL the way around the holster mouth surely helps. Another thing you can do is to force-dry the holster with heat after molding. The good thing about that is that it increases rigidity. The bad thing about that is that it increases rigidity.....in a holster that's going to be pressed against your body by your belt...... I've taken to using horsehide almost exclusively for IWB holsters. It tends to be more rigid, either with or without force-drying. Quote Share this post Link to post Share on other sites
