2" Buckles Needed

[Indy]

I had a few inquirys for broad gunbelts which shall be 5cm (approx. 2") in width. I am especcialy looking for blank, clipped corner buckles. I couldn't find any at tandy nor on ebay or the central European online stores I am familiar with.

Anybody of you who knows where to get them? Can't be that hard, I suppose?

[ABC3]

Indy,

google "the buckle guy". They may have what your looking for.

I had a few inquirys for broad gunbelts which shall be 5cm (approx. 2") in width. I am especcialy looking for blank, clipped corner buckles. I couldn't find any at tandy nor on ebay or the central European online stores I am familiar with.

Anybody of you who knows where to get them? Can't be that hard, I suppose?

[Frank]

I would taper the 2" belts to a standard 1.5" at both ends and use regular buckles if it is feasible.

Frank

[Scary Leatherworks]

I had a few inquirys for broad gunbelts which shall be 5cm (approx. 2") in width. I am especcialy looking for blank, clipped corner buckles. I couldn't find any at tandy nor on ebay or the central European online stores I am familiar with.

Anybody of you who knows where to get them? Can't be that hard, I suppose?

not clipped but it is 2" http://springfieldle...Sq%2CSB%2C2%22/

and a couple wide buckles about 3/4 down the page http://www.hardwareelf.com/elf/buckles.jsp

Edited February 5, 2012 by Scary Leatherworks

[Indy]

unfortunaly the belt need to be at least 5cm (2") wide, so tapering the belt won't work.

Thank you for the links, that might do the job