Bluesman Report post Posted February 9, 2012 I just finished a belt and want to install the fancy belt tip. I have it fit to the belt, but how do I keep it on? There are two very small holes on the backside of the tip. So, I'm open what's the procedure? Thanks in advance, Jon Quote Share this post Link to post Share on other sites
dirtclod Report post Posted February 9, 2012 It should of come with a couple of little screws that fit flush with the buckle when their put in. Quote Share this post Link to post Share on other sites
Bluesman Report post Posted February 9, 2012 No screws and no threads. Quote Share this post Link to post Share on other sites
Northmount Report post Posted February 9, 2012 1328753708[/url]' post='233441']No screws and no threads. Are either of the holes threaded for a screw? If so, there should have been at least one small pointed 'grub' screw. If no holes threaded, I'd look look at using epoxy on the flesh side. Test on a scrap to see if the epoxy bleeds any color through to the grain side. Anyone else with a solution? CTG Quote Share this post Link to post Share on other sites
Bluesman Report post Posted February 9, 2012 Are either of the holes threaded for a screw? If so, there should have been at least one small pointed 'grub' screw. If no holes threaded, I'd look look at using epoxy on the flesh side. Test on a scrap to see if the epoxy bleeds any color through to the grain side. Anyone else with a solution? CTG Looked closer, threads. Now I need to find the grub who has my screws. Thanks Jon Quote Share this post Link to post Share on other sites
Luke Hatley Report post Posted February 9, 2012 If the buckle set came from tandy they have a package of screws to sell you. this has happened to me before. Quote Share this post Link to post Share on other sites
