Can You Help Me With Some Tools?

[Gump]

I got these a while back and there's three I haven't go the slightest clue about. Number 1, and 3.....this has a wicked looking kinda serrated edge but only on one side, not serrated but spaces in the edge. (Has anyone noticed round fat wooden things don't wanna stay put on a scanner, LOL) and the knife thingy I put 12 on. and the Myers wheely thing is too loose to use. I thought one of those tiny pins had come out but there's not a hole for a pin on the other side. That's the tool the key goes to. I adore the one awl with the different handle, I think I could actually use it to sew with and not stab myself. The hole punch was suppose to be for stitching, but the holes are way too big I think to use to sew. Maybe lacing. Anyway, any ideas on what they are, how to clean and any idea on fixing the Myers thing would be greatly appreciated. Cheryl

Cheryl; The large fid is used to lace together the ends of industrial flat belting to run line shaft equipment in old factories. They use what is called pigging, a waxy pigskin lace. The lace is run through the same holes twice and must be pushed aside for the next pass. Since the lace is thick and wide, and belting won't stretch so you need a really stout fid. Gump.

[DoubleC]

Oh, thanks Gump. I use it for all my lacing.....but it's nice to know what it's for. Cheryl

[bluesman1951]

God bless you and recommending WD 40 when I worked with guns I made a fortune off of folks who used that on their guns .When left for awhile it turns to varnish coating every thing and turns the insides of a fire arm to tar . Its supposed to displace water and seal which is good for electrical stuff. The WD stands for WATER DISPLACEMENT . Lock smiths love this stuff it never stops making them money as folks use it and gum up there locks . Sadly the public has been convinced this is the answer to all metal problems . At any good gun store and some auto places Pep Boys etc is a lubricant called "TRI FLOW" best stuff ever for all things metal its claim to fame is its silicone based and lubes and protects like you cant believe .

I think the forked thing is a tack puller. #12 is a cobblers blade though I've seen regular leather workers use them too as trim knives.

Get out some WD40 and saturate the metal... allow to soak, then scrub with some fine steel wool. Or you could try an old gardener's trick. motor oil in a bucket of sand... plunge tools in and out for several minutes until the rust is gone.

[Sylvia]

God bless you and recommending WD 40 when I worked with guns I made a fortune off of folks who used that on their guns .When left for awhile it turns to varnish coating every thing and turns the insides of a fire arm to tar . Its supposed to displace water and seal which is good for electrical stuff. The WD stands for WATER DISPLACEMENT . Lock smiths love this stuff it never stops making them money as folks use it and gum up there locks . Sadly the public has been convinced this is the answer to all metal problems . At any good gun store and some auto places Pep Boys etc is a lubricant called "TRI FLOW" best stuff ever for all things metal its claim to fame is its silicone based and lubes and protects like you cant believe .

Why thank you for the blessings. And Tip... I see I neglected to say WD40 then wipe off and oil.... I actually use WD40 for fishing... but that's another story.

I prefer liquid wrench.... but finding it can be a bear. (or good old kerosene)