Need Help With Home Made Beveler

[yuliya]

I want to make the beveled that was shown in the video.

Could someone tell me what can be used as the brass piece?

I can't even imaging where to start looking for something like that:-)

[megabit]

Which video? Four Strands of Rawhide?

[yuliya]

Which video? Four Strands of Rawhide?

Bernie's video how to make a beveled for roo lace from wood

[yuliya]

Ok, I just read through the comments to the video and he said he made it himself.

I guess will have to ask my husband for help:-)

[megabit]

Brass is fairly soft so if you have a dremel it shouldn't be too difficult. You could also try using hard plastic like from a cutting board too.

[AZ Pete]

I used a piece of aluminum from Home Depot, a hacksaw and a drill to made the slide portion. Not too hard to make. Aluminum is very soft and easy to work with.

[Sylvia]

I want to make the beveled that was shown in the video.

Could someone tell me what can be used as the brass piece?

I can't even imaging where to start looking for something like that:-)

Hello:

Could you please post a link to the video?

S

[megabit]

[yuliya]

Thanks Megabit!

that's the one I was talking about.

[Don Ayres]

Why not make it from wood ??

[Don Ayres]

Use a dremel to make it

[Ccastle27]

I used a scrap piece of Aluminum as well - to get the shape I just filed it down a bit on the small part - seems to work pretty well, though I don't have super-fine control over it.