Members ouchmyfinger Posted March 28, 2012 Members Report Posted March 28, 2012 i will be getting my cobra 4 in 2 weeks and it is my first machine. I'm looking into ordering some needles and thread so it will be here when my machine arrives and i don't know what to order. i am going to be doing some wallets, belts and purses as well as some western rigs. i don't want to go the cheap way out so what is the best thread i can use as well as needles. looking for any info that will be helpful so i can practice a little with what i will be using thanks Quote
Moderator Wizcrafts Posted March 28, 2012 Moderator Report Posted March 28, 2012 Why haven't you already ordered your needles and thread from Steve? They could ship with the machine, saving you postage and probably a higher price from someone else. On the other hand, if he is out of stock, you can get your needles and thread from Toledo Industrial Sewing Machines. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members ouchmyfinger Posted March 28, 2012 Author Members Report Posted March 28, 2012 Why haven't you already ordered your needles and thread from Steve? They could ship with the machine, saving you postage and probably a higher price from someone else. On the other hand, if he is out of stock, you can get your needles and thread from Toledo Industrial Sewing Machines. because i don't know what to order. I'm not sure what i should get as far as thread goes and i would need to know that before i order needles. my machine won't ship till next week i would like to go with a good thread that won't give me many problems and will create a nice finished product. i have tried poly thread once on someone else machine and it seemed to buildup around the needle eye like dandruff or something lol. thanks Quote
Techsew Ron Posted March 28, 2012 Report Posted March 28, 2012 because i don't know what to order. I'm not sure what i should get as far as thread goes and i would need to know that before i order needles. my machine won't ship till next week i would like to go with a good thread that won't give me many problems and will create a nice finished product. i have tried poly thread once on someone else machine and it seemed to buildup around the needle eye like dandruff or something lol. thanks You'll probably want to purchase bonded nylon thread which frays a lot less. Also get yourself some diamond point needles, needle system 794D, you should be able to find some made by Grosz Beckert or Schmetz. Download and print out this chart for matching needle and thread sizes: http://raphaelsewing.com/blog/?p=11 Ron Quote Techsew Industrial Sewing Machines Call toll-free: 866-415-8223 Visit www.techsew.com
Moderator Wizcrafts Posted March 28, 2012 Moderator Report Posted March 28, 2012 (edited) Your machine uses system 7x3 or 794 needles. For sewing wallets and purses you will probably use #92 bonded nylon thread. This calls for a #19 needle; #20 tops. Belts will probably be sewn with #138 bonded nylon thread, using a #22 needle; #23 tops. Tack, reins, collars, bridles, common holsters, knife and tool sheaths should be sewn with #277 bonded nylon or bonded polyester thread, using a #25 needle. Go up one needle size when sewing Biothane. Duty holsters are usually sewn with #346 bonded nylon, or 6 cord linen thread (run through a liquid wax), using a #26 to #27 needle. If you go into production, buy two spools of thread in each size and color you will be using. One is for the top, the other is for reloading spare bobbins as you sew. Notes: Smaller needle sizes are typically only available in standard round point. This encompasses sizes 18 through 22. The remaining sizes are available in either round, or a variety of leather points, with S being the most popular. It lays down a straight stitch that sits tightly against or even into the top grain. Common left twist leatherpoint needles produce a zig-zag pattern. Triangle points produce a straight line, but leave marks on the sides, However, they fill in the holes more than other leather points. I hope this helps. Edited March 28, 2012 by Wizcrafts Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members ouchmyfinger Posted March 28, 2012 Author Members Report Posted March 28, 2012 yes it does, i did have another question, why do they sell a left and right twist thread? also i hear about people using a different size on top and bottom. is that just to accommodate for not having 2 spools to thread the bobbins? also when you say a zig zag is that bad looking, same question as far as the straight stitch that leaves marks. is there a way to keep it from leaving marks? i heard that someone had smoothed out the feet to keep that from happening. I'm just overwhelmed with trying to figure all this out before i ruin some leather lol, when you were talking about duty holsters and running it through wax, how is that done it seems like i would use that often seriously thank you for your help Quote
gtwister09 Posted March 28, 2012 Report Posted March 28, 2012 (edited) You have already been given some great information for this but here's a compiled document that I put together sometime back for Adlers. However the needle system is the same and should give you some good general guidelines for selection by types of products, size/thickness of material, needle selection charts as well as a chart based on recommendations compiled from various vendors. Go to this thread and get the PDF. It should help guide you on your decisions for guidelines from many different sources. http://leatherworker...ndpost&p=231011 Hope that helps answer a bunch of your questions. I would have strongly suggested that you would have talked with your machine vendor (Steve in this case) and told him what you were trying to do. He would have been most helpful in guiding you as to the decision of needles and thread required. Regards, Ben Edited March 28, 2012 by gtwister09 Quote
Members ouchmyfinger Posted March 28, 2012 Author Members Report Posted March 28, 2012 I wanted the opinions of some leatherworker. I know he is great with customer service but I do not know if he does leatherwork himself. Thanks for the link also. I still haven't gotten anyone to say what thread is the best to use Quote
Members Rayban Posted March 28, 2012 Members Report Posted March 28, 2012 (edited) I wanted the opinions of some leatherworker. I know he is great with customer service but I do not know if he does leatherwork himself. Thanks for the link also. I still haven't gotten anyone to say what thread is the best to use See post #5 When I bought my Cowboy 3500 from Toledo Bob, I asked him the very same questions....this is what I want to make, what do I need....he told me, and threw it in as a package. Edited March 28, 2012 by Rayban Quote Raybanwww.rgleather.net
Moderator Art Posted March 28, 2012 Moderator Report Posted March 28, 2012 Usually, needles and thread come with the machine. If not ask for them. Use them to practice sewing. you asked about right hand twist; it is used for curved needle machines like the Landis 12 shoe machines. It will be a somewhat long time till you will want any of that. Just learn with what you got till you need to change thread sizes, then you can find out about thread suppliers and needle suppliers on this board. The thread exchange and Maine thread come to mind. Cutex had a bunch of supplies at reasonable prices. Art i will be getting my cobra 4 in 2 weeks and it is my first machine. I'm looking into ordering some needles and thread so it will be here when my machine arrives and i don't know what to order. i am going to be doing some wallets, belts and purses as well as some western rigs. i don't want to go the cheap way out so what is the best thread i can use as well as needles. looking for any info that will be helpful so i can practice a little with what i will be using thanks Quote For heaven's sakes pilgrim, make yourself a strop!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.