Presser Feet Supplier

[Spinner]

In talking to various machine vendors about my Techsew 2700 and the available presser feet it didn't seem much was available and that I would have to customize my own. This isn't a big deal since I have a good metal working set-up but the standard presser foot might not be strong enough to support some of my 'experiments'. So after searching long and hard and trying some of the feet on the market I found two online stores that offer the five, yes 5, variations of standard presser feet for the Techsew 2700/Cowboy CB227/Singer 153W. Granted, they are not specialty feet (those can be found on ebay and a number of other places) but the basic foot with slight differences. The two places I found that carry both the inside & matching outside foot combinations are:

http://www.pennsewparts.com/ - slightly better prices, placed order will comment on shipping cost/time once received

http://www.sewcat.com/ - good alternate if Penn is out of stock

Here's the breakdown of part numbers after a few phone calls:

Inside foot:

U-240149 Standard foot - polished or chrome plated (aka Silver)

U-240149B Standard foot - flat Black finish

U-240149H Standard foot - Heavy duty (thicker base)

U-240149T Standard foot - Teflon Coated (the U-240149T-SU is the same foot but made in Japan)

U-240149W Standard foot - Wide version

Outside foot:

U-240148 Standard foot - polished or chrome plated (aka Silver)

U-240148B Standard foot - flat Black finish

U-240148H Standard foot - Heavy duty (thicker base)

U-240148T Standard foot - Teflon Coated (the U-240149T-SU is the same foot but made in Japan)

U-240148W Standard foot - Wide version

I'll update the list as I find more specialty versions and can confirm part numbers/suppliers.

Cheers,

Chris