Jump to content

Recommended Posts

  • Members
Posted

Would you be able to send me the pattern you used for this? I would like to try this pattern for my phone. :begging:

Robyn

Robyn,

Apparently, I didn't make a pattern for this project, but simply measured and used a square and drew it on the leather. I'll check my notes and give you the measurements at least. Sorry. I do things kinda bass ackwards alot....LOL.

Posted
1336910861[/url]' post='247652']

Robyn,

I'd be happy to send it to you. Let me see if I can find it.

Dimensional specs for most phones are available on the web on the OEMs site. Cut and carve a chunk of wood to the same or slightly larger dimensions to check fit if you don't have access to the phone or are wet forming. If wet forming, add at least 1/16" to the dimensions, and split the block in half lengthwise. Use a skewer or such to spread the halves a little. The when it's dry, you can pull the skewer out, and no big fight to get the block out!

CTG

  • Members
Posted

I JUST TRACED AN IPHONE TO A PIECE OF PAPER, AND USED 2 PIECES OF 8OZ LEATHER STACKED AND GLUED AND IT WAS PERFECT.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...