Don Ayres Report post Posted April 25, 2012 Does anyone have a good pattern for a civil war style hat or kepi ? Thanks Don Quote Share this post Link to post Share on other sites
Zonker Report post Posted April 25, 2012 Does anyone have a good pattern for a civil war style hat or kepi ? Thanks Don When I'm ack home tonight I'll send you what I made. It needs a little tweaking. Quote Share this post Link to post Share on other sites
Zonker Report post Posted April 26, 2012 Okay I couldnt find my drawings but here is a picture of the pieces cut out. If you scale the circle to 6 inch diameter you could use this pic as a pattern. I would change the back line of the side pieces to where it drops straight down about 2 inches from the bottom so the back doesnt come out in a point at the bottom. Quote Share this post Link to post Share on other sites
Don Ayres Report post Posted April 27, 2012 Do you have any pattern measurements, for this kepi? Quote Share this post Link to post Share on other sites
Zonker Report post Posted April 28, 2012 Not really other than that the top is 6 inch diameter and the strip is one inch wide I made from playing with poster board and duct tape because I couldnt find a pattern anywhere anyone was willing to share. It is really not that tough a thing. What I recommend is save the picture , then open it in photoshop or whatever do a threshhold on it and scale it to where the top is 6 inch diameter print it taoe it to poster board cut it out tape it together see how it fits and then scale it up or down from there til you get it it. Poster board is cheap and even if it takes you 3 or 4 tries it shouldnt take more than an hour to find where you need it. since I used tooling lether and nothing is hemmed under the pieces will need a hemming allowance if you are sewing up suede or canvas. i just whip stitched the top and double zigzagged the sides. I may make another with a cooler lacing on the top this summer. But If I do I will probably tool the top and a patch for the front as well. Quote Share this post Link to post Share on other sites
MacPruette Report post Posted April 30, 2012 many years ago, I used to do Civil War re-enacting. Period Impressions made a pattern. http://www.dixiegunworks.com/product_info.php?cPath=22_107_300_304&products_id=9921 Hope this helps. Quote Share this post Link to post Share on other sites
Don Ayres Report post Posted May 5, 2012 (edited) Hey Zonker, Thanks, Unfortunately I am unable to scale this pic up to size, can you give me a few measurements for the sides of the Hat ? Thanks Don Edited May 5, 2012 by Don Ayres Quote Share this post Link to post Share on other sites
Zonker Report post Posted May 6, 2012 Don I will try to redo them as a I was saying and post them in a clear pdf with measurements and all but it might be a week or so before I have it with everything else going on. Quote Share this post Link to post Share on other sites
Zonker Report post Posted May 18, 2012 Don I dont know if this'll help but if you take this print it out and enlarge it untill the front edge is 3 inches and the top edge corner to corner is 9.25. The top circle is 6inches across and the strap around it is 1 inch by 24. The brim I just fiddles around by hand and did it. skyved 1/4 inch on the inside to fold up and attach to crown Quote Share this post Link to post Share on other sites
