Thumb Break Question

[jlaudio29]

What are you all using for the metal support that i always see on thumb breaks. that little metal strip plate.

Or if there are any other methods im open to ideas.

[troop]

i use the metal clips from this supplier. you have to order minimum 500 pieces. but well worth it.

http://www.jrmclips.com/

Tony

Edited May 1, 2012 by troop

[camano ridge]

High Dessert Leather sells them 10 for $7.00.

http://www.highdesertleather.com/id74.html

Scott

[glockanator]

I was given some steel strapping.off a pallet. Just.cut.it.to size drill holes and attatch attatch.

[gringobill]

I've been making my own out of 16 ga steel that I cut in 1/2" strips, then cut to the length I need , round the ends on grinder and belt sander and drill holes. Pretty easy and pretty cheap.

[Eaglestroker]

Ive used a few things. Kydex works pretty well too. Old bandsaw blades work fairly well.

[RMB Custom Leather]

I have used Kydex and made my own metal ones but I now buy them in bulk. I have alot in stock if you haven't found some, click below if you want to take a look.

Edited May 1, 2012 by RMB Custom Leather

[Bronson]

I've made my own out of stainless steel but for the hassle it's easier to order the stainless steel ones from High Desert Leather.

Bronson

[NoName]

+1 for Glockanator's answer.