Members Opagon Posted January 17, 2008 Members Report Posted January 17, 2008 I have been seeing alot of nice Bosals being posted lately so I thought that I would make a hanger to go with them. 3 adjustment knots lets it fit a multitude of horse heads. Quote
Members paris3200 Posted January 18, 2008 Members Report Posted January 18, 2008 Very Nice. Jason Quote
Members Hidemechanic Posted January 18, 2008 Members Report Posted January 18, 2008 Good work. I think you could safely call that a Yakima (ja-quee-mah). That would be the name the vaqueros used for the whole out fit, which has morphed in to hackamore with time and mispronunciation. The bridle(hanger as you call it) with or without a throat latch was basically the Fiador was configured in a way as to hold the Bosal at a proper angle. The Macate' (ma-cot-ee)makes up a loop rain with the left over being a 'lead rope' (usually made of horse hair)is able to adjust tightness of the bosal on the nose. Just in case you were not aware. This is a vary traditional starter rig for buckroos. Between you and some horse hair folks on the board you should be able to come up with some real nice rigs. Thanks for sharing. GH Quote
Froghunter Posted January 18, 2008 Report Posted January 18, 2008 Sweet work! That is definately something I need to learn....I even had to have the wife braid my pony tail!!! Quote
Members rawhide1 Posted January 18, 2008 Members Report Posted January 18, 2008 Opagon Nice work thanks for sharing!!!! Mike Quote
HorsehairBraider Posted January 18, 2008 Report Posted January 18, 2008 Very nice! It does look like it would fit just about any equine. Is that kangaroo? Beautiful leather. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.