aparkes Report post Posted July 10, 2012 Hi!! I've never had a problem with my machine in the four years I've had it, but tonight I was sewing along, there was a clinking noise, and the needle will no longer go all the way down. The thread will still catch, but it can't complete the stitch. I replaced the needle, so it isn't that, and the problem still occurs with the bobbin and bobbin case out, so it isn't that either. Any thoughts on how to fix it, or should I just take it to someone? And if I need to take it to someone, anyone have recommendations for someone in TN? Any help much appreciated! Quote Share this post Link to post Share on other sites
dirtclod Report post Posted July 10, 2012 These folks work on machines i think and their in TN. Not sure if it's anywhere close to you or not. http://www.nickosew.com/index.php Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted July 10, 2012 Definitely contact Nick-O Sewing since they are in your State. Otherwise, Toledo Industrial Sewing Machines services all makes and models, including Singer industrial sewing machines. Their number is 866-362-7397 Quote Share this post Link to post Share on other sites
KAYAK45 Report post Posted August 6, 2012 +2 on the advice local and Toledo. You have only those choices, or make it a heavy, expensive anchor. Your choices. Kevin Quote Share this post Link to post Share on other sites
Jimbob Report post Posted August 6, 2012 Mike's sewing machine repair, he is in Lebanon VA....30 min from TN....but depends where u are in TN....he is very good and VERY cheap!! SEnd PM if you need help.... Quote Share this post Link to post Share on other sites
