aparkes Posted July 10, 2012 Report Posted July 10, 2012 Hi!! I've never had a problem with my machine in the four years I've had it, but tonight I was sewing along, there was a clinking noise, and the needle will no longer go all the way down. The thread will still catch, but it can't complete the stitch. I replaced the needle, so it isn't that, and the problem still occurs with the bobbin and bobbin case out, so it isn't that either. Any thoughts on how to fix it, or should I just take it to someone? And if I need to take it to someone, anyone have recommendations for someone in TN? Any help much appreciated! Quote
dirtclod Posted July 10, 2012 Report Posted July 10, 2012 These folks work on machines i think and their in TN. Not sure if it's anywhere close to you or not. http://www.nickosew.com/index.php Quote
Moderator Wizcrafts Posted July 10, 2012 Moderator Report Posted July 10, 2012 Definitely contact Nick-O Sewing since they are in your State. Otherwise, Toledo Industrial Sewing Machines services all makes and models, including Singer industrial sewing machines. Their number is 866-362-7397 Quote
KAYAK45 Posted August 6, 2012 Report Posted August 6, 2012 +2 on the advice local and Toledo. You have only those choices, or make it a heavy, expensive anchor. Your choices. Kevin Quote
Members Jimbob Posted August 6, 2012 Members Report Posted August 6, 2012 Mike's sewing machine repair, he is in Lebanon VA....30 min from TN....but depends where u are in TN....he is very good and VERY cheap!! SEnd PM if you need help.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.