Glock Holster Question?

[Grabagear]

So I was asked to make a g21 pancake holster. But I only have a g17. I looked up the specs. The g21 is 3 mm wider 1 mm taller and a few mm longer. Do u think molding the g17 not so tight ' would be OK for a tight fit g21 holster? Or should I not even try it? Thanks a lot for the help!

[renegadelizard]

So I was asked to make a g21 pancake holster. But I only have a g17. I looked up the specs. The g21 is 3 mm wider 1 mm taller and a few mm longer. Do u think molding the g17 not so tight ' would be OK for a tight fit g21 holster? Or should I not even try it? Thanks a lot for the help!

It wont fit..3mm wider and 1 mm taller is the problem...longer you can get away with, but width and height you cant fudge.

[chiefjason]

9MM, .40, and .357 sig Glocks are the same dimensions, other than slide length differences. .45 is certainly bigger.

[Sixer]

Try it.

Move your stitch line by the slide out by 1/8th in. Don't mold it super tight. It will work just fine.

Ask me how I know