Members Vianeth Posted September 17, 2012 Members Report Posted September 17, 2012 Here are the tools I ordered today from Barry King Swivel knife 1/2" barrel 3/8" straight thin blade checkered beveler size 2 smooth beveler size Lined, scalloped veiner size 2 Horizontal thumbprint size 2 Lined veiner size 1 mule foot size 0 Bar grounder27, 7holes I'm pretty excited to replace my craftools with better ones, and I'm wondering what you guys suggest I buy for my next patch, which stamps? I'm new to sheridan style so i'm not sure what my priority should be other than a decent beveler. I picked out what seemed like important ones from King's recommended size list for small/medium work! Alicia Quote
terrymac Posted September 17, 2012 Report Posted September 17, 2012 You have started out with a good combination of tools. My only recommendation would be to get some different sizes in the tools you bought. For example your 27 bargrounder, 7 hole will be to large to fit into small areas. I have a 3 hole and use it quite a bit. As you progress, you will notice which tools really don't fit, so the need for different s sizes. I recently bought an "0" size checkered beveler to use on tight curves. You are difinitely on the right track, just start doing some work and you will figure out the rest with experience. Good luck, Terry Quote
Moderator bruce johnson Posted September 17, 2012 Moderator Report Posted September 17, 2012 I'd add undershots/lifters in a couple of sizes. Quote
Chief31794 Posted September 17, 2012 Report Posted September 17, 2012 I would also think about a camoflage tool or two and a seeder, they are used quite a bit in Floral Carving. Congratulations, you'll love the Barry King tools. Ken Quote
electrathon Posted September 17, 2012 Report Posted September 17, 2012 Center shader and a leaf liner. Aaron Quote
Contributing Member Bob Blea Posted September 17, 2012 Contributing Member Report Posted September 17, 2012 After you get the items listed above (particularly the center shader and leaf liner!) you might want to think about getting quality flower center stamps. If your craftool ones are the older ones that leave a good impression this probably isn't very important. In my case, the ones I've bought from Barry King are far better than what I had and they are now pretty much all I ever use for flower centers. I also agree with having a few different sizes of veiners and thumprints. They come in handy. Bob Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.