Skwerl Report post Posted January 6, 2013 Howdy folks, I want to start doing some filagree work on wallets backed with snake or alligator. I'm not sure as to which glue to use though. Barge is a two part glue (glue goes on both pieces till dry. Then pressed together.) So that probably won't work so great. So I would love to hear suggestions and or previous success stories. Thanks Mike Quote Share this post Link to post Share on other sites
electrathon Report post Posted January 6, 2013 I have used barge and put a heavy wet coat on the back of the piece, then lay it on the backing piece. Weight it down and leave it for a while. It will stick. Quote Share this post Link to post Share on other sites
Skwerl Report post Posted January 9, 2013 So no votes for any glue besides Barge? Quote Share this post Link to post Share on other sites
mikesmith648 Report post Posted January 9, 2013 Tanner's Bond works well and dries fairly clear.........and it will not need so heavy a coat Quote Share this post Link to post Share on other sites
sinpac Report post Posted January 9, 2013 Howdy folks, I want to start doing some filagree work on wallets backed with snake or alligator. I'm not sure as to which glue to use though. Barge is a two part glue (glue goes on both pieces till dry. Then pressed together.) So that probably won't work so great. So I would love to hear suggestions and or previous success stories. Thanks Mike I use Master Cement Quote Share this post Link to post Share on other sites
Skwerl Report post Posted January 10, 2013 Hmm...not seeing any consistent answer. I guess that leaves it to personal taste. I just want a piece that is going to hold up to daily use. Quote Share this post Link to post Share on other sites
