LeatherWerks Report post Posted January 25, 2013 I'm planning on doing a little upholstry work, recovering some bar stools in leather. These chairs have a welt sewn in various areas. Does anyone know where I can buy a welt foot for a Cobra 4 machine? Thanks, Steve Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted January 26, 2013 To my knowledge, there are no welting feet made for the 441 type machines. You will need to have a set made by a local machine shop. Better yet, buy an extra inside foot and grind down the outer left side. Use it with the right toe presser foot to sew close to the welt. Quote Share this post Link to post Share on other sites
Art Report post Posted January 27, 2013 Tape your seam togeather (inside out), tuck the outer around the welt cord and mark the stitch line. Use the left toe presser (the right toe can be used, just depends on how you sew it) and sewthe line. If you can't get close enough to the weltcord, you will have to take a grinder and relieve the center foot to do it. This is why uhpolstery guys use a medium machine that uses 111 feet, you can get any size welting foot for them easily. Art Quote Share this post Link to post Share on other sites
