Members najram2007 Posted June 2, 2013 Members Report Posted June 2, 2013 Heres the link to the holster and stirrup type needle plates for the 335. http://www.kwokhing.com/pfaff/ anyone use these?? Quote
Trox Posted June 2, 2013 Report Posted June 2, 2013 My 345 has a binding feed, the bottom transporter (feed dog) goes back and forth only. (to power the synchronized binder) When I use the machine for other stuff I changes the feed dog and needle plate. Then I lower the feed dog a bit under the plate or else it disturb the feed. Then you have top and needle feed left, bottom feed is not much used on leather anyway. When you use smooth feed dog and feet`s the needle does most of the feeding anyway. The machine perform good on regular leather work. Tor Quote Tor Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100
Members najram2007 Posted June 3, 2013 Members Report Posted June 3, 2013 Great Info. Thanks Tor Quote
Members Diezell Posted June 5, 2013 Members Report Posted June 5, 2013 Thanks Tor, I also live 10 min from Utrecht. Quote
Trox Posted June 5, 2013 Report Posted June 5, 2013 Thanks Tor, I also live 10 min from Utrecht. You are welcome, I think Utrecht is the nicest city in Holland. Both Amsterdam and Rotterdam are to big and have to much crime. Nice binding job there. Tor Quote Tor Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.