Members Zooker Posted February 27, 2013 Members Report Posted February 27, 2013 I hate to even ask, but apparently a lot of gun manufacturers are not shipping to New York. I need to make the holsters for my CAS rig and I don't have my guns. What is your typical width for the belt loop on a Colt clone loop holster? I am running out of time for the first event. I need to plan my belt as it is the only thing I can make. I appreciate any insight. Thanks, Ken Quote
Members Dwight Posted February 27, 2013 Members Report Posted February 27, 2013 I use a piece of leather that I cut a tad wider than 3/4 inch. I do that so that when I pull it through the 3/4 wide slots, . . . it will not slide back. Hope this helps. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Members leatherjunkie Posted February 27, 2013 Members Report Posted February 27, 2013 all the cas rigs i have seen are 2 1/2 inch wide belts the holsters i have made for cas will fit a 2 1/2 "belt Quote keep it in the 10 range or at least hit the steel.
Members Zooker Posted February 28, 2013 Author Members Report Posted February 28, 2013 Thanks for the help guys. I appreciate it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.