Members lightningad Posted March 15, 2013 Members Report Posted March 15, 2013 Ingenious - couldnt do that myself - my hole saw uses a drillbit as a guide so the mug would have a perfectly central hole! If you dont mind me asking (and if its a secret thats fine) how do attach the handles? Quote "You is what you am, a cow don't make ham!" Frank Zappa - Musical Visionary Barking Rooster Leather Goods Pinterest Page
Members ReneeCanady Posted March 15, 2013 Author Members Report Posted March 15, 2013 I laugh because the first time I did it with the drill press and put a hole in the bottom also lol. I use the drill press for that also. Attached with screws thru the leather into the handle. Quote www.facebook.com/alteredleather
Members lightningad Posted March 15, 2013 Members Report Posted March 15, 2013 hmmm...i can feel another project queueing up behind my two current ones! Quote "You is what you am, a cow don't make ham!" Frank Zappa - Musical Visionary Barking Rooster Leather Goods Pinterest Page
electrathon Posted March 15, 2013 Report Posted March 15, 2013 Ingenious - couldnt do that myself - my hole saw uses a drillbit as a guide so the mug would have a perfectly central hole! Remove the alignment bit from the hole saw. Clamp the board to the table. Drill a round hole w/o a pilot. Go very slow at the start. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.