Members kylewade Posted April 30, 2013 Members Report Posted April 30, 2013 Could anyone give a few pointers on ranger belts. As in how to get the measurement right and a name centered. went for one and messed it up pretty bad Quote
Tree Reaper Posted April 30, 2013 Report Posted April 30, 2013 Are you trying to get the name centered on the length or width of the belt? Quote
Members Dwight Posted April 30, 2013 Members Report Posted April 30, 2013 A properly measured belt will put the buckle's tooth into the center hole of the 5 or 7 holes in the belt (you can look on my belt page of my website for proper measuring for a belt). It doesn't make any difference if it is a ranger belt, . . . guard belt, . . . rassler's trophy belt, . . . that is still the proper way to meaure for a belt. Most jeans have a loop dead center of the back, . . . 180 degrees opposite the center of the buckle. When I put a name on a belt, . . . I start at that center space, . . . and work to my left, . . . one letter at at time, . . . backwards for the first name. If they want their last name, . . . leave space for the loop, . . . put the last name on one letter at a time, . . . going forwards in the name. Just the way I do it, . . . nothing set in concrete says it has to be done that way. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.