Members EmbossingDieCompany Posted June 15, 2013 Members Report Posted June 15, 2013 I was using the "block dye" technique but managed to get black dye inside my embossed letters......is there any way to fix this? I'm assuming I can't remove black dye...... Quote
Members Cyberthrasher Posted June 15, 2013 Members Report Posted June 15, 2013 What's you pink color? If it's paint, then you can go over the black. If it's dye, you may have to paint it anyway. Other than that, you're correct. The key to block dying is to make sure it's light dye on your block and use VERY LIGHT pressure. If you're getting it on too light, you can go back over, but as you can see, too much and there's no going back. Quote
Members EmbossingDieCompany Posted June 15, 2013 Author Members Report Posted June 15, 2013 Ugh......not what I wanted to hear but it's what I expected. Yes, the pink is dye. Quote
Northmount Posted June 15, 2013 Report Posted June 15, 2013 Paint it now in order to save your previous work. Tom Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.