Members mikeymoto Posted January 20, 2008 Members Report Posted January 20, 2008 (edited) I'm primarily a sheath maker. I often have 3-4 stacked layers of 7/8, 8/9 ounce leather and I want to find some eyelets that will go through that thickness. I want metal all the way through. I don't know, but Tandy only sells rivets suitable for one or MAXIMUM two layers of leather. Anyone know where I can find these, assuming I know the lengths I need? I have seen eyelets in this length before on commercial sheaths, but I can not find a supplier. Edited January 20, 2008 by mikeymoto Quote
Contributing Member wolvenstien Posted January 20, 2008 Contributing Member Report Posted January 20, 2008 Welcome to the forum Have you tried Ohio travel bag? Think its www.ohiotravelbag.com great site for hardware. Quote
Contributing Member barra Posted January 20, 2008 Contributing Member Report Posted January 20, 2008 Try motor trimmer/canvas worker suppliers. Barra Quote
Members Rayban Posted February 27, 2008 Members Report Posted February 27, 2008 I'm primarily a sheath maker. I often have 3-4 stacked layers of 7/8, 8/9 ounce leather and I want to find some eyelets that will go through that thickness. I want metal all the way through. I don't know, but Tandy only sells rivets suitable for one or MAXIMUM two layers of leather.Anyone know where I can find these, assuming I know the lengths I need? I have seen eyelets in this length before on commercial sheaths, but I can not find a supplier. I'm also looking for long eyelets...have you had any luck finding them? Please let me know and I'll do the same back at ya!! Thanks. Quote
TracyMoss Posted February 28, 2008 Report Posted February 28, 2008 The longest one I could find in the OTB Catolog is 5/16" SB, but no washers to go with it. I don't think that will be even close. Quote
Members Rayban Posted February 28, 2008 Members Report Posted February 28, 2008 The longest one I could find in the OTB Catolog is 5/16" SB, but no washers to go with it. I don't think that will be even close. The ones that come with washers are usually a bit larger and are considered Grometts, I believe. Eyelets are usually one piece and the tool crimmps the edges over, to make it look like the other end. They are out there....gotta find em, I have an order to fill!! Ill post a picture of what I need them for next....gotta find the picture....here we go. This sheath shows the eyelets going thru 3 layers of 8oz. approx. Quote
TracyMoss Posted February 28, 2008 Report Posted February 28, 2008 They make eyelets with washers as well. Check your OTB catalog. They have them in there. Quote
Members Rayban Posted February 28, 2008 Members Report Posted February 28, 2008 They make eyelets with washers as well. Check your OTB catalog. They have them in there. OTB??? I have no OTB catalog.....I have a Springfield Leather Co. one however, and they list a 3/16" eyelet with "long" post, but they don't say how long is long.....1-800-668-8518...I'll be calling them too. I'm gonna check on Weaver Leather as well. Quote
Members Sharpshooter Posted February 28, 2008 Members Report Posted February 28, 2008 (edited) OTB??? I have no OTB catalog.....I have a Springfield Leather Co. one however, and they list a 3/16" eyelet with "long" post, but they don't say how long is long.....1-800-668-8518...I'll be calling them too.I'm gonna check on Weaver Leather as well. You'll find the eyelets at Siska Fasteners... The part number is S42 They are also referred to by the Stimpson Number GS6-14 The "Post" is .183" diameter and .437 long The problem is that Siska will only sell to businesses and in large quantities; I buy them 50,000 at a time because I requite that they be Nickle Plated. I don't know how many you're looking for but if it's for a small job you can contact me at the e-mail address on my website and we can hook you up. Reid Edited February 28, 2008 by Sharpshooter Quote
Members Rayban Posted April 24, 2008 Members Report Posted April 24, 2008 You'll find the eyelets at Siska Fasteners... The part number is S42 They are also referred to by the Stimpson Number GS6-14The "Post" is .183" diameter and .437 long The problem is that Siska will only sell to businesses and in large quantities; I buy them 50,000 at a time because I requite that they be Nickle Plated. I don't know how many you're looking for but if it's for a small job you can contact me at the e-mail address on my website and we can hook you up. Reid Thanks so much Reid!!! They fit perfectly through 3 layers of 8-10oz. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.