Nylon Thread For Handstitching

[NVLeatherWorx]

If you are making items that will have heavy exposure to the sun and outdoor elements, directly, then go with a poly thread as it is the best when it comes to UV resistance. Otherwise just go with either a nylon or linen as they have a very good tensile strength and are easier to work with because they can be waxed. I use both on my designs, nylon for all interior assemblies and linen for primary edge assembly. I also do all of my stitching by hand as there is yet to be a machine made that will replicate the interlocking strength of the saddle stitch, they only do a lock stitch and we all know that when a stitch breaks the whole thing comes apart. There are those who will try and sell you on a specific direction or idea because that is what they do but the bottom line is to find what works for you and meets your needs as it is your work on the line and not theirs.

If you have a brand that is meeting is your needs and expectations then stick with it. Just remember, "if it ain't broke, don't fix it" and you will always be right.

[quinatt]

If you are making items that will have heavy exposure to the sun and outdoor elements, directly, then go with a poly thread as it is the best when it comes to UV resistance. Otherwise just go with either a nylon or linen as they have a very good tensile strength and are easier to work with because they can be waxed. I use both on my designs, nylon for all interior assemblies and linen for primary edge assembly. I also do all of my stitching by hand as there is yet to be a machine made that will replicate the interlocking strength of the saddle stitch, they only do a lock stitch and we all know that when a stitch breaks the whole thing comes apart. There are those who will try and sell you on a specific direction or idea because that is what they do but the bottom line is to find what works for you and meets your needs as it is your work on the line and not theirs.

If you have a brand that is meeting is your needs and expectations then stick with it. Just remember, "if it ain't broke, don't fix it" and you will always be right.

Do you worry about twist direction on you nylon thread? Do you know any source for right twist nylon that is prewaxed and has a sizing available? if you handwax your nylon, does it take the wax well? Do you just buy the bonded left twist machine nylon that seems to be readily available? thanks

[NVLeatherWorx]

I don't concern myself with all of this twist stuff and other techno babble anymore as once you have your techniques down and your skills are refined you could make barbed wire look great. I purchase my threads pre-waxed but always give them an extra treatment or two to make sure that they are properly covered. Oh, I also wax my leather lace prior to use. The wax is intended to be a conditioner and helps keep the strands together during the process (for the lace it keeps it from premature wear and failure due to the stresses and friction caused while pulling it through the lacing slits).

I also keep a couple spools of 9 strand waxed nylon on hand that I usually break down into whatever strand configuration I want to create for those special times when you just need a little more or a little less.

[quinatt]

Still searcing for a source for waxed nylon thread in sizes comparable to 207 or 277. I would settle for left twist at this point

[poseidon]

Hi try threadexchange.com i get mine from there lots of colors on size 207 It's unwaxed though just buy some bees wax and wax it yourself its easy.

here are sample pics with size 207 nylon i dont know what twist they are. thanks hope it helps.

24mm lug width strap

21mm lug width strap

21mm lug width strap

[quinatt]

i might end up doing that. Its frustrating that there arent many sources for waxed nylon with specific sizes provided

Your stitches look good though. I worry about getting the wax to penetrate the nylon thread good enough. I know you can wax and then rub with a brown paper bag to get it to melt in but i wonder sometimes if that works as well as just having a thread that is prewaxed.

Ill prob pick up some from the thread exchange but still interested in other sources.