Members JenGranger Posted December 20, 2016 Members Report Posted December 20, 2016 I'm going to apply it with a sponge. Quote
Members CaptQuirk Posted December 20, 2016 Members Report Posted December 20, 2016 Why do you cut it? I've been using it full strength with a brush as a resist. It works ok, if I am patient enough to apply a few coats... and wait overnight. When I'm not patient enough, it doesn't work so good. I found that out with some interesting results. Quote
Members JenGranger Posted December 21, 2016 Members Report Posted December 21, 2016 I'm glad to know it works as a resist. I was wondering if it did. Quote
Contributing Member 24VOLTS Posted January 17, 2017 Contributing Member Report Posted January 17, 2017 Minwax now sells a water based laqure. I use it as a resist. I think it is comparable to neat lac. Quote
Members retiredff Posted January 28, 2017 Members Report Posted January 28, 2017 Have you tried painting acrylic over the minwax? Does it hold up to bending? Any info appreciated. Quote
NVLeatherWorx Posted January 28, 2017 Report Posted January 28, 2017 Mop & Glo on leather isn't, and shouldn't be, your first choice for a finish. I recall the days when I was in the Army and there were always these guys that had to have the shiniest boots on the ground. Most of us would do the spit shine routine for those special days but being in combat arms it isn't typical to have a mirror like gloss on your combat boots, it just doesn't fit the job. But, as stated a bit ago, there were some who thought that it would make them "stand out" more so they would get that super high gloss spit shine and then finish it off with Mop & Glo. I can tell you from 24 years of that life and experience that once you pressed your finger down on the toe cap of that highly shined boot all you would see was a grayish spider web effect from the Mop & Glo cracking. It is not meant to be used on leather, nor has it ever been meant to; it is a floor finish and intended to be used on hard surfaces. If an item needs to have that much shine to it there are sources for leather that already has that finish to it. Not to mention, the chemicals that are contained within Mop & Glo and other finishes that are designed for products other than leather can damage the leather and potentially lead to failure of the leather down the road. For those who have used the Neat-Lac product of the past and wish to return/continue to use it, the same product is available from Springfield Leather but it is just under another name. What they sell is in fact the original Neat-Lac and it is still made by the very same company who has been making it all along. When Tandy let the Neat-Lac product run out and disappear I went on a mission to find its replacement, that is when I ran across the original product and have continued to use it all along. And, even though it does contain chemicals, everything in the mix is specifically intended for use on fine leather and fine leather goods; it is also oil/conditioner heavy which is why you don't see it cracking when you flex it. Quote Richard Hardie R. P. Hardie Leather Co. R. P. Hardie Leather Co. - OnlineR. P. Hardie Leather Co on Facebook
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.