Members phil7153 Posted January 16, 2014 Members Report Posted January 16, 2014 Does anyone know of a company that sells belt kits for a double layer belt? I have seen numerous kits for single layered bets, but I am looking for one that I can glue myself and practice my hand-stitching and burnishing. As this will be a concealed carry belt I would want the kit to be somewhat substantial, so something like two 6/7oz pieces, or something a little thicker with a liner. Thanks for any and all help. -Phil Quote
Members camano ridge Posted January 16, 2014 Members Report Posted January 16, 2014 Most of the concealed carry belts I make are about 1/4". Just simply buy two belt blanks or strips from Springfield or who ever. Get a buckle and a couple of chicago screws and either buy a pre made belt loop or make your own and now you have a kit. Old Faithful Holsters sells a double layer kit that is already stitched but undyed. I have not seen anyone that sold an actual double layer kit. Again it should be fairly easy to put together your own kit. Quote
Members 5shot Posted January 16, 2014 Members Report Posted January 16, 2014 +1 Just cut the inner piece off just short of the fold and have at it. No need to have it a 1/4" where it wraps over the buckle anyway. Quote
Members phil7153 Posted January 16, 2014 Author Members Report Posted January 16, 2014 Thanks for the replies. I kind of figured that was going to be my option, but just wanted to make sure there was not something like this already out there as a kit. Thanks again. -Phil Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.