Members phil7153 Posted January 16, 2014 Members Report Posted January 16, 2014 Does anyone know of a company that sells belt kits for a double layer belt? I have seen numerous kits for single layered bets, but I am looking for one that I can glue myself and practice my hand-stitching and burnishing. As this will be a concealed carry belt I would want the kit to be somewhat substantial, so something like two 6/7oz pieces, or something a little thicker with a liner. Thanks for any and all help. -Phil Quote
Members camano ridge Posted January 16, 2014 Members Report Posted January 16, 2014 Most of the concealed carry belts I make are about 1/4". Just simply buy two belt blanks or strips from Springfield or who ever. Get a buckle and a couple of chicago screws and either buy a pre made belt loop or make your own and now you have a kit. Old Faithful Holsters sells a double layer kit that is already stitched but undyed. I have not seen anyone that sold an actual double layer kit. Again it should be fairly easy to put together your own kit. Quote https://www.facebook.com/CamanoRidgeCustomLeather?fref=ts
Members 5shot Posted January 16, 2014 Members Report Posted January 16, 2014 +1 Just cut the inner piece off just short of the fold and have at it. No need to have it a 1/4" where it wraps over the buckle anyway. Quote
Members phil7153 Posted January 16, 2014 Author Members Report Posted January 16, 2014 Thanks for the replies. I kind of figured that was going to be my option, but just wanted to make sure there was not something like this already out there as a kit. Thanks again. -Phil Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.