Jump to content

Recommended Posts

  • Members
Posted

HI ALL : Has any one purchased the SMITH TRI HONE and if so is it good for sharpening swivel knives and small leather tools ?? also need recommendations on honing oil, which is best ?? I saw a post on here some where some recommending a black rouge called 555 ?? Is this better than the green ??? I am learning so al comments and info appreciated !! Thanks.

Posted

I wouldn't use a stone for swivel knife blades.

Green compound on card stock is all you need to keep them razor sharp.

For other leather tools, (not swivel knives) you can use a dremel with emery and the felt discs with green compound.

Posted

Once you get the angles on your blades.....a simple piece of 800 & 1200 wet/dry sandpaper glued to something flat work out great! If you read on line references regarding the different rouges you can find out what best fits your needs. I own all of the colors, but I mostly use the green bar from Leather Wranglers. I have a dedicated strop on my bench and in the garage, but like it was stated, you can use a simple business card or poster board.

Good luck!

  • Members
Posted (edited)

Flitz has worked well for me for stropping and most hardware stores carry it. It too will work on cardstock. I also like the wet/dry papers on plate glass or on 1" flat steel used like a file. I have India stones for rough work, and some real nice hard Arkansas stones for the fine stuff and finish it off with a few strops on some Flitz. Most of it comes down to what works best for you, trial and error sort of thing. Also practice practice practice

Edited by J Hayes

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...